MMM-Netatmo updated

Tribun

@Laz Sorry, I got the module wrong, I used RaymondMolenaar’s module. There it was enough to recreate the module data on the Netatmo developer homepage and to exchange the data in config.js. A few months ago I recreated the access data because the module was no longer working properly, something was probably wrong with the API at the time Netatmo changed.
I have the new data "clientId: "
"clientSecret: "
“refreshToken:”
“accessToken:”
inserted into the config and the module works again.

Laz

@Tribun
Thank you
Did you create an app on the https://dev.netatmo.com/apps/ website?

I tried to put the RaymondMolenaar module once.

Here above (September 27, 2022) I wrote about my problem…

How did you get token ?

On the Netatmo application page, it is not clear which token should be used… ((

Tribun

@Laz
At choose scopes: select “read station” and press generate token, you will get the “refreshToken:” and
“accessToken:”

Enter all newly created values in config.js after that it should work again.

Laz

@Tribun

Mitch_66

Hi All, thanks for the support provided in this forum here. Awesome!

I’m following all what is said here: got “refreshToken”, “accessToken” via the Netatmo page, entered it in the config.js exactly as stated here. Nevertheless, the module won’t show up on the mirror - just a small circle beneath the header.

Am I missing “something”, a specific setting for the mirror? The RBpi is not publicly accessible from the internet, no web hook URI, no direct URI configured.

Any help appreciated! The Netatmo module is the feature why we have the MM2!

Mitch_66

@Mitch_66 I found the solution to my problem: once I inserted the moduleOrder parameter, the module showed up. As it isn’t marked as “required”, I didn’t put it in the first place.

Maybe helps somebody having the same issue

Laz

@Mitch_66
Good afternoon!
Please show your config in this module. I also prescribed this parameter, but my Netatmo module does not appear… (((

Mitch_66

@Laz
Will do but you’ll need to wait a bit. Currently far away from home, back in a week

Mitch_66

@Laz
Here’s my config that works. The name for the rooms in Netatmo are as specified in the Netatmo App. It’s a quite ‘old’ Netatmo module, talking about 8 years or so hence for sure not the latest hardware.

            {
                    module: 'MMM-Netatmo',
                    disabled: false,
                    position: 'bottom_bar', // the location where the module should be displayed
                    header: 'Netatmo',
                    config: {
                            clientId: 'clientID', // your app id
                            clientSecret: 'clientSecret', // your app secret
                            refreshToken: 'refresh|token', // your generated refresh token
                            accessToken: 'access|token',
                            location: "germany/badenwurttemberg/stuttgart-arnulf-klett-platz",  //for AirQuality
                            updateIntervalAirQuality: 300, // in secondes = every 30 minutes
                            updatesIntervalDisplay: 60, //refresh internal
                            lastMessageThreshold: 600, // in seconds (10 minutes)
                            horizontal: true,
                            horizontalOverflow: false,
                            windUnit: "KMH",
                            showLastMessage: true,
                            showDataIcon: true,
                            showDataHeader: true,
                            showModuleStatus: true,
                            showModuleFirmware: true,
                            refreshInterval: 3,
                            moduleOrder: ["Wohnzimmer", "Schlafzimmer", "Terrasse" ],
                    }
            },

Laz

@Mitch_66
Thank you!
I’ll try to check. Unfortunately, I have already left the city where my MM is standing. I will try through VNC access.