MMM-SynologySurveillance

[digied]

@wishmaster270 Great! I did see the certificate error so I changed the https/5001 into http/5000 in the config and now the log shows this:

[16.01.2023 20:49.14.962] [LOG] MMM-SynologySurveillance: {
“dsIdx”: 0,
“camStreams”: {
“Generic_ONVIF-001”: “http://datanas//192.168.2.26:5000/webapi/entry.cgi?api=SYNO.SurveillanceStation.Stream.VideoStreaming&version=1&method=Stream&format=mjpeg&cameraId=2&StmKey="6058a182182e0c518d126bbf69e2e350"”
}
}
[73749:0116/204923.065357:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 1 times!
[73749:0116/204930.176714:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 2 times!
[73749:0116/204930.183104:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 3 times!
[16.01.2023 20:50.05.716] [LOG] MMM-SynologySurveillance: Received notification REFRESH_URLS
[16.01.2023 20:50.05.718] [LOG] MMM-SynologySurveillance: Refreshing the urls!
[16.01.2023 20:50.05.719] [LOG] MMM-SynologySurveillance: Updating information of DS with idx: 0 and protocol http
[16.01.2023 20:50.08.721] [LOG] MMM-SynologySurveillance: Found cam Generic_ONVIF-001
[16.01.2023 20:50.09.721] [LOG] MMM-SynologySurveillance: {
“dsIdx”: 0,
“camStreams”: {
“Generic_ONVIF-001”: “http://datanas//192.168.2.26:5000/webapi/entry.cgi?api=SYNO.SurveillanceStation.Stream.VideoStreaming&version=1&method=Stream&format=mjpeg&cameraId=2&StmKey="6058a182182e0c518d126bbf69e2e350"”
}
}

Now the certificate error is gone, but still no image from the cam.

[digied]

@wishmaster270 Sorry, haven’t seen your change of the replaceHostname before. I now set it to false and now I can see the image, but very small at the moment. SO the stream is working now, I just have to get the image larger now. Thanks for your help!

[wishmaster270]

@digied Perfect. I will look into the module to check if I can accept self signed certificates and why the host part is not replaced correctly.

Edit:
You should be able to set the cam with by adding some CSS to the file MagicMirror/css/custom.css:

.MMM-SynologySurveillance .cam { 
    width: 100%; 
 }

[digied]

@wishmaster270 said in MMM-SynologySurveillance:

.MMM-SynologySurveillance .cam {
  width: 100%;
}

Yes, together with height: 100% as well the image is there. Thanks!

[wishmaster270]

@digied Just released a new version which fixes the host part replacement

[digied]

@wishmaster270 Installed the update and all is working fine now. Thanks for your help. :folded_hands_light_skin_tone:

[wishmaster270]

@digied Great to hear that. You are welcome.

[digied]

@wishmaster270 Suddenly, starting today, I see the grey square with the little cam in it. Didn’t change a thing!

Log:
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to open kms_swrast: /usr/lib/dri/kms_swrast_dri.so: kan gedeeld objectbestand niet openen: Toegang geweigerd (search paths /usr/lib/aarch64-linux-gnu/dri:$${ORIGIN}/dri:/usr/lib/dri)
failed to load driver: kms_swrast
MESA-LOADER: failed to open swrast: /usr/lib/dri/swrast_dri.so: kan gedeeld objectbestand niet openen: Toegang geweigerd (search paths /usr/lib/aarch64-linux-gnu/dri:$${ORIGIN}/dri:/usr/lib/dri)
failed to load swrast driver
[21.02.2023 17:25.05.039] [LOG] MMM-SynologySurveillance: Received notification CONFIG
[21.02.2023 17:25.05.040] [LOG] MMM-SynologySurveillance: Received notification INIT_DS
[21.02.2023 17:25.05.042] [LOG] MMM-SynologySurveillance: Updating information of DS with idx: 0 and protocol https
[21.02.2023 17:25.07.730] [LOG] MMM-SynologySurveillance: Problem during fetch of cams of ds with idx: 0
[21.02.2023 17:25.07.730] [LOG] MMM-SynologySurveillance: {
“errno”: -3008,
“code”: “ENOTFOUND”,
“syscall”: “getaddrinfo”,
“hostname”: “datanas”
}
[21.02.2023 17:25.07.731] [LOG] Unknown error. Sending empty list of streams!
[6591:0221/172507.750557:ERROR:gl_surface_presentation_helper.cc(260)] GetVSyncParametersIfAvailable() failed for 1 times!

Can I do anything?

[wishmaster270]

@digied Hi,

looks like a DNS problem to me. Your Mirror can not resolv the ip of “datanas”.

Did there happen a update of your router maybe?

[digied]

@wishmaster270 No, the cam has died. Need to buy a new one.