Read the statement by Michael Teeuw here.
LVDS controller cable
-
@MadScientist I tried but screen just flickering (screen flash blank)
I have a good power 4A, not easy , but it’s better before there was nothing :) -
@Daiki Do you have an extra LED driver for LCDs? You could take the connections from there. Kinda like in this picture:
-
Yes i have on the controller it’s use with 5V :/
on the picture below the power supply for led are connected on item 9
-
Maybe try a MOSFET to get 3.3V. However, I am not very confident that would work. I don’t understand why it didn’t work when you combined the pins 28 and 30 with 2 and 3.
What happens when you only put 3.3V on pin 30, leaving 28 (VDD) disconnected? And what happens if you reverse it (28 = 3.3V, 30 = 0V)?Maybe somebody else with more experiences with LCDs could join the conversation?
-
hello sorry for my late answer, i think i will leave it , put alll in a bag and put in trash , too much problem for a small thing.
Thank you to help me ;)
