MMM-AdminPanel get problem

[sdetweil]

@emrah_asl does

http://pi_address:8080

from your pc open the mm?

assuming 192.168.0.29 is your PC address?

[sdetweil]

@emrah_asl localhost means from this machine, so browser running on mm machine

[emrah_asl]

@emrah_asl said in MMM-AdminPanel get problem:

When i try in over browser
http://localhost:8080/MMM-Admin-Interface/

Hi, I’m doing this inside my raspberry browser.

http://localhost:8080/

is working for MM.

192.168.0.29 is my rpi internal ip which means i connect via VNC server

[sdetweil]

@emrah_asl said in MMM-AdminPanel get problem:

http://localhost:8080/MMM-Admin-Interface/

where do you do this from?

note that the ipWhitelist addresses are not correct

if using ipv4, its address/mask

I usually make ipWhilelist:[],
to allow anyone on my local network to access, until I get it the way I want

[emrah_asl]

@sdetweil said in MMM-AdminPanel get problem:

http://localhost:8080/MMM-Admin-Interface/

//where do you do this from?

answe is, I’m writing inside raspberry 4b browser

[sdetweil]

@emrah_asl hm…

i added module and default config,

and (my MM on port 8090 as another app is using 8080)

http://localhost:8090/MMM-Admin-Interface/

shows

so I would blank out the ipWhitelist to

ipWhitelist:[],

[emrah_asl]

Hi @sdetweil

Yeah you right again ! When I leave blanks ipWhitelist, It is works.

Bu interesting, what should do coorect restrictons about this point.

I’m connecting my rpi over VNC servier with 192.168.0.29 in my windows.

[sdetweil]

@emrah_asl what is your windows pc IP address

ipWhitelist: [ windows_ip/32 ],

my windows IP is 192.168.2.106, so would be

ipWhitelist:[192.168.2.106/32],

that means, ipv4 addresses are 32 bits wide (4 chars)

so, allow this address windows_ip, and use all 32 bits for address matching

you can match the local network

windows_ip/24 which would be
any system with address starting with 192.168.0

[sdetweil]

@emrah_asl also, vnc vs mm. mm implements its own network security . so vnc connection has nothing to do with mm connection