How Can I Mount my smart mirror to a wall?

[Dentrax]

@sdetweil said in How Can I Mount my smart mirror to a wall?:

you could use C as well, using only the bottom screw… so it rotates…
this would allow the loop of cable at C to be in the open space behind the mirror, reducing the protusion from the wall to just the thickness of the mounting flange

Thank you so much! I’m just thinking if I don’t want to use a “hanger wire”, can i do it this way? And for the wall (hanging) side, I can go with something like “L screw hook hanger”, as the following in the second picture. What do you think?

[sdetweil]

@dentrax the smaller screw, flat head, maybe longer. at least 1/2 the size of the side

drill a pilot hole so u don’t crack the material.

hanger wire for sure, and a picture hook. they can hold up to 25kg.! the cable gives you the ability to balance and straighten

[doogy_rev]

I used a French cleat on mine, one top and bottom

https://images.homedepot-static.com/productImages/798600fb-cfa2-45b3-87a5-f19be3a097cc/svn/hangman-picture-mirror-hanging-cbh-30-64_1000.jpg

[sdetweil]

@doogy_rev because of his sliding back panel he has no material on the top to used one of these

[doogy_rev]

@sdetweil

Could always put a piece of batten across to fill the gap, just screw through that in to the frame it will then sit flush

[OberfragGER]

@dentrax What about french cleat?
https://en.wikipedia.org/wiki/French_cleat

Thats the way i mountet my MM. Its vers stable and always horizontal.