Read the statement by Michael Teeuw here.
Calendar events showing on wrong day.
-
@coolie1101 you cant run with pm2 AND with npm start
so, thats why I said
pm2 stop allTHEN (in the MagicMirror folder)
npm start -
@sdetweil said in Calendar events showing on wrong day.:
(I am central US time)
Don’t sleep much :grinning_face:
-
@coolie1101 said in Calendar events showing on wrong day.:
Don’t sleep much
its past 8am… been up since 6 (cat wakes me reliably)
-
@sdetweil said in Calendar events showing on wrong day.:
@coolie1101 you cant run with pm2 AND with npm start
so, thats why I said
pm2 stop allTHEN (in the MagicMirror folder)
npm startGot it, I edited the “calendarutils.js” file again and restarted, no error or calendar entries in log, but the display is the same.
-
@coolie1101 weird
edit config.js and change
logLevel: ["INFO", "LOG", "WARN", "ERROR"]to
thislogLevel: ["INFO", "LOG", "WARN","ERROR","DEBUG"]and run again, then u will see the calendar processing
-
@coolie1101 and a reminder, there are TWO sections of code u have to comment out
two areas of two lines each
-
@sdetweil Yes.
Line 348 & 358
// if (event.start.tz === moment.tz.guess()) { // if the date hour is less than the offset if (24 - dh < Math.abs(dateoffset / 60)) { // apply the correction to the date/time back to right day date = new Date(date.getTime() + Math.abs(24 * 60) * 60000); // the duration was calculated way back at the top before we could correct the start time.. // fix it for this event entry //duration = 24 * 60 * 60 * 1000; Log.debug("new recurring date2 is " + date); } // }Line 376 & 386
// if (event.start.tz === moment.tz.guess()) { // if the date hour is less than the offset if (24 - dh < Math.abs(dateoffset / 60)) { // apply the correction to the date/time back to right day date = new Date(date.getTime() + Math.abs(24 * 60) * 60000); // the duration was calculated way back at the top before we could correct the start time.. // fix it for this event entry //duration = 24 * 60 * 60 * 1000; Log.debug("new recurring date2 is " + date); } // } -
@sdetweil said in Calendar events showing on wrong day.:
and run again, then u will see the calendar processing
Will it work like this “npm start >cal_test_log.txt | grep calendar”?
-
@coolie1101 said in Calendar events showing on wrong day.:
Will it work like this
no…
something like this (couple debug lines added for my testing)
[19.11.2021 07:50.24.603] [DEBUG] Processing entry... [19.11.2021 07:50.24.603] [DEBUG] Event: {"type":"VEVENT","params":[],"start":"2021-04-06T09:00:00.000Z","datetype":"date-time","end":"2021-04-06T14:00:00.000Z","rrule":{"_cache":{"all":false,"before":[],"after":[],"between":[]},"origOptions":{"dtstart":"2021-04-06T09:00:00.000Z","freq":2,"wkst":{"weekday":6},"until":"2021-12-30T04:59:59.000Z","byweekday":[{"weekday":1}]},"options":{"freq":2,"dtstart":"2021-04-06T09:00:00.000Z","interval":1,"wkst":6,"count":null,"until":"2021-12-30T04:59:59.000Z","bysetpos":null,"bymonth":null,"bymonthday":[],"bynmonthday":[],"byyearday":null,"byweekno":null,"byweekday":[1],"bynweekday":null,"byhour":[9],"byminute":[0],"bysecond":[0],"byeaster":null}},"dtstamp":"2021-11-19T12:42:16.000Z","uid":"0v89h5cit8nq6mfribble@google.com","created":"2021-10-26T07:58:43.000Z","description":"","lastmodified":"2021-10-26T08:02:54.000Z","location":"","sequence":"1","status":"CONFIRMED","summary":"YARD WASTE","transparency":"OPAQUE"} [19.11.2021 07:50.24.603] [DEBUG] startDate (local): Tue Apr 06 2021 04:00:00 GMT-0500 (Central Daylight Time) [19.11.2021 07:50.24.603] [DEBUG] endDate (local): Tue Apr 06 2021 09:00:00 GMT-0500 (Central Daylight Time) [19.11.2021 07:50.24.604] [DEBUG] duration: 18000000 [19.11.2021 07:50.24.604] [DEBUG] title: YARD WASTE [19.11.2021 07:50.24.604] [DEBUG] Search for recurring events between: Fri Nov 19 2021 07:50:24 GMT-0600 (Central Standard Time) and Fri Nov 18 2022 23:59:59 GMT-0600 (Central Standard Time) [19.11.2021 07:50.24.605] [DEBUG] Title: YARD WASTE, with dates: ["2021-11-23T09:00:00.000Z","2021-11-30T09:00:00.000Z","2021-12-07T09:00:00.000Z","2021-12-14T09:00:00.000Z","2021-12-21T09:00:00.000Z","2021-12-28T09:00:00.000Z"] [19.11.2021 07:50.24.605] [DEBUG] event.recurrences: undefined [19.11.2021 07:50.24.605] [DEBUG] recurring date is Tue Nov 23 2021 03:00:00 GMT-0600 (Central Standard Time) offset is 360 [19.11.2021 07:50.24.605] [DEBUG] recurring date is Tue Nov 23 2021 03:00:00 GMT-0600 (Central Standard Time) offset is 6 Hour is 03 [19.11.2021 07:50.24.606] [DEBUG] not full day [19.11.2021 07:50.24.606] [DEBUG] offset positive [19.11.2021 07:50.24.606] [DEBUG] Corrected startDate (local): Tue Nov 23 2021 03:00:00 GMT-0600 (Central Standard Time) [19.11.2021 07:50.24.606] [DEBUG] initial tz=America/New_York [19.11.2021 07:50.24.606] [DEBUG] corrected tz=America/New_York [19.11.2021 07:50.24.606] [DEBUG] start date/time=Tue Apr 06 2021 04:00:00 GMT-0500 (Central Daylight Time) [19.11.2021 07:50.24.606] [DEBUG] start offset=-240 [19.11.2021 07:50.24.606] [DEBUG] start date/time w tz =Tue Apr 06 2021 04:00:00 GMT-0500 (Central Daylight Time) [19.11.2021 07:50.24.606] [DEBUG] event date=Tue Nov 23 2021 03:00:00 GMT-0600 (Central Standard Time) [19.11.2021 07:50.24.606] [DEBUG] event offset=-300 hour=4 event date=Tue Nov 23 2021 03:00:00 GMT-0600 (Central Standard Time) [19.11.2021 07:50.24.606] [DEBUG] offset [19.11.2021 07:50.24.606] [DEBUG] adjust up 1 hour dst change [19.11.2021 07:50.24.606] [DEBUG] adjustHours=1 [19.11.2021 07:50.24.606] [DEBUG] duration: 18000000 [19.11.2021 07:50.24.607] [DEBUG] saving event: false -
@sdetweil It’s running, how long should I wait before checking the output file?, as there is no output in the ssh window.
-
@coolie1101 til the calendar comes up with the wrong displayed info
then ctrl-c to end
-
@sdetweil Here’s the out in the file.
> magicmirror@2.17.1 start /home/pi/MagicMirror > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js [19.11.2021 09:42.53.017] [LOG] Starting MagicMirror: v2.17.1 [19.11.2021 09:42.53.028] [LOG] Loading config ... [19.11.2021 09:42.53.041] [LOG] Loading module helpers ... [19.11.2021 09:42.53.456] [LOG] Initializing new module helper ... [19.11.2021 09:42.53.458] [LOG] Module helper loaded: MMM-Remote-Control [19.11.2021 09:42.53.461] [LOG] No helper found for module: alert. [19.11.2021 09:42.53.469] [LOG] Initializing new module helper ... [19.11.2021 09:42.53.471] [LOG] Module helper loaded: updatenotification [19.11.2021 09:42.53.472] [LOG] No helper found for module: clock. [19.11.2021 09:42.53.782] [LOG] Initializing new module helper ... [19.11.2021 09:42.53.784] [LOG] Module helper loaded: calendar [19.11.2021 09:42.55.195] [LOG] Initializing new module helper ... [19.11.2021 09:42.55.196] [LOG] Module helper loaded: MMM-TelegramBot [19.11.2021 09:42.55.203] [LOG] Initializing new module helper ... [19.11.2021 09:42.55.204] [LOG] Module helper loaded: MMM-Detector [19.11.2021 09:42.55.987] [LOG] Initializing new module helper ... [19.11.2021 09:42.55.997] [LOG] Module helper loaded: MMM-GoogleAssistant [19.11.2021 09:42.55.999] [LOG] No helper found for module: MMM-JokeAPI. [19.11.2021 09:42.56.001] [LOG] No helper found for module: weather. [19.11.2021 09:42.56.181] [LOG] Initializing new module helper ... [19.11.2021 09:42.56.183] [LOG] Module helper loaded: MMM-Tools [19.11.2021 09:42.56.900] [LOG] Initializing new module helper ... [19.11.2021 09:42.56.902] [LOG] Module helper loaded: MMM-MotionDisplay [19.11.2021 09:42.56.955] [LOG] Initializing new module helper ... [19.11.2021 09:42.56.957] [LOG] Module helper loaded: newsfeed [19.11.2021 09:42.56.958] [LOG] All module helpers loaded. [19.11.2021 09:42.57.123] [LOG] Starting server on port 8080 ... [19.11.2021 09:42.57.139] [LOG] Server started ... [19.11.2021 09:42.57.142] [LOG] Connecting socket for: MMM-Remote-Control [19.11.2021 09:42.57.144] [LOG] Starting node helper for: MMM-Remote-Control [19.11.2021 09:42.57.157] [LOG] Connecting socket for: updatenotification [19.11.2021 09:42.57.159] [LOG] Connecting socket for: calendar [19.11.2021 09:42.57.161] [LOG] Starting node helper for: calendar [19.11.2021 09:42.57.163] [LOG] Connecting socket for: MMM-TelegramBot -
@coolie1101 there should be lots more
I only need to see the processing of that one cal entry
-
@sdetweil That’s everything in the file, I did tail the file, but the out is alot.
-
@coolie1101 can’t be everything
cause there are default messages for calendar not shown
u did add the “DEBUG”, right
-
Event: {"type":"VEVENT","params":[],"start":"2021-04-06T09:00:00.000Z","datetype":"date-time","end":"2021-04-06T14:00:00.000Z","dtstamp":"2021-11-19T14:43:09.000Z","uid":"0v89h5cit8nq6m************@google.com","created":"2021-10-26T07:58:43.000Z","description":"","lastmodified":"2021-10-26T08:02:54.000Z","location":"","sequence":"1","status":"CONFIRMED","summary":"YARD WASTE","transparency":"OPAQUE","recurrences":{"2021-11-02":{"type":"VEVENT","params":[],"start":"2021-11-03T09:00:00.000Z","datetype":"date-time","end":"2021-11-03T14:00:00.000Z","dtstamp":"2021-11-19T14:43:09.000Z","uid":"0v89h5cit8nq6m************@google.com","recurrenceid":"2021-11-02T09:00:00.000Z","created":"2021-10-26T07:58:43.000Z","description":"","lastmodified":"2021-10-26T08:02:54.000Z","location":"","sequence":"2","status":"CONFIRMED","summary":"YARD WASTE","transparency":"OPAQUE"},"2021-10-12":{"type":"VEVENT","params":[],"start":"2021-10-13T09:00:00.000Z","datetype":"date-time","end":"2021-10-13T14:00:00.000Z","dtstamp":"2021-11-19T14:43:09.000Z","uid":"0v89h5cit8nq6m************@google.com","recurrenceid":"2021-10-12T09:00:00.000Z","created":"2021-10-26T07:58:43.000Z","description":"","lastmodified":"2021-10-26T08:02:54.000Z","location":"","sequence":"2","status":"CONFIRMED","summary":"YARD WASTE","transparency":"OPAQUE"},"2021-09-07":{"type":"VEVENT","params":[],"start":"2021-09-08T09:00:00.000Z","datetype":"date-time","end":"2021-09-08T14:00:00.000Z","dtstamp":"2021-11-19T14:43:09.000Z","uid":"0v89h5cit8nq6m************@google.com","recurrenceid":"2021-09-07T09:00:00.000Z","created":"2021-10-26T07:58:43.000Z","description":"","lastmodified":"2021-10-26T08:02:54.000Z","location":"","sequence":"2","status":"CONFIRMED","summary":"YARD WASTE","transparency":"OPAQUE"},"2021-07-06":{"type":"VEVENT","params":[],"start":"2021-07-07T09:00:00.000Z","datetype":"date-time","end":"2021-07-07T14:00:00.000Z","dtstamp":"2021-11-19T14:43:09.000Z","uid":"0v89h5cit8nq6m************@google.com","recurrenceid":"2021-07-06T09:00:00.000Z","created":"2021-10-26T07:58:43.000Z","description":"","lastmodified":"2021-10-26T08:02:54.000Z","location":"","sequence":"2","status":"CONFIRMED","summary":"YARD WASTE","transparency":"OPAQUE"},"2021-06-01":{"type":"VEVENT","params":[],"start":"2021-06-02T09:00:00.000Z","datetype":"date-time","end":"2021-06-02T14:00:00.000Z","dtstamp":"2021-11-19T14:43:09.000Z","uid":"0v89h5cit8nq6m************@google.com","recurrenceid":"2021-06-01T09:00:00.000Z","created":"2021-10-26T07:58:43.000Z","description":"","lastmodified":"2021-10-26T08:02:54.000Z","location":"","sequence":"2","status":"CONFIRMED","summary":"YARD WASTE","transparency":"OPAQUE"}},"rrule":{"_cache":{"all":false,"before":[],"after":[],"between":[]},"origOptions":{"dtstart":"2021-04-06T09:00:00.000Z","freq":2,"wkst":{"weekday":6},"until":"2021-12-30T04:59:59.000Z","byweekday":[{"weekday":1}]},"options":{"freq":2,"dtstart":"2021-04-06T09:00:00.000Z","interval":1,"wkst":6,"count":null,"until":"2021-12-30T04:59:59.000Z","bysetpos":null,"bymonth":null,"bymonthday":[],"bynmonthday":[],"byyearday":null,"byweekno":null,"byweekday":[1],"bynweekday":null,"byhour":[9],"byminute":[0],"bysecond":[0],"byeaster":null}}} -
@coolie1101 unless u didn’t stop pm2 running instance
-
@sdetweil said in Calendar events showing on wrong day.:
unless u didn’t stop pm2 running instance
I did, “pm2 stop all”, then “npm start file_name.txt”
@sdetweil said in Calendar events showing on wrong day.:
u did add the “DEBUG”, right
Yes.
```
language: “en”,
locale: “en-US”,
logLevel: [“INFO”, “LOG”, “WARN”,“ERROR”,“DEBUG”], // Add “DEBUG” for even more logging
timeFormat: 24,
units: “imperial”, -
@coolie1101 said in Calendar events showing on wrong day.:
“npm start file_name.txt”
and with the > symbol
npm start > file_name.txt
-
@sdetweil So I deleted the entry for that day and added back just for that day, it shows up correct in the display but the following events still shows a day late.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login