working module Raspberry Pi 4 and PIR?

[Murky3057]

@DariBer
Yes, that’s what I imagined.
To be as simple as possible.

Sorry for my english, I’m using a translator.

[DariBer]

@Murky3057

OK, I had that in mind, my problem is, when my monitor turnes on, it start some kind of splash screen that is pink/purple with Benq logo before it’s totally tuned on, I find that so annoying to see. That’s the reason I’m not going that path :)

[Murky3057]

@DariBer
Another solution is to create a script to run the command “xset dpms force off” to turn off the monitor and “xset dpms force on” to turn it on.
Use this video as an example to create something similar.

https://youtu.be/Tw0mG4YtsZk

[bugsounet]

I give a lot of courage for find ;)

[sdetweil]

@bugsounet your standalone solution is archived, so not very helpful .

[bugsounet]

@sdetweil because I’m kind ;)

I purpose to try this

Work with rpi 3a -> rpi 4
(not tested with rpi < 3a)
tested OS : Buster and Bulleyes

My actual config is:

My actual modules and plugins are:

And works since 116 days on Bulleyes with an RPI 4 ;)

[hpgraphia]

@DariBer

https://github.com/paviro/MMM-PIR-Sensor
I’m using it with raspi zero W with sensor and works great

[DariBer]

@hpgraphia

how does your config.js file look like for that module?
Would you be kind and show it?

[eracerhead]

I’ve done this by putting a relay directly in the backlight circuit. Connect the PIR to 5V and a gpio pin, and the relay to 5V and another GPIO pin. Use wiring pi and a simple bash script to get the state of the PIR and energize/de-energize the relay appropriately. It’s really simpler than it sounds and requires little to no knowledge of electronics.

You need to first install wiring-pi

sudo wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb

Here’t the script I run at startup to control it - works great.

#!/bin/bash
#
# Runs in the background to switch backlight on or off
# depending upon the state of the PIR motion sensor.   
#
# Usage: nohup backlightd [-r|-f] 0<&- &>/dev/null &
# 	-r log on loghost
#	-f log locally (default)
#
# Set as configured
PIR=18		# GPIO BCM number of PIR sensor
BACKL=15	# GPIO BCM number of backlight relay
OFF_DEL=60	# Minimum number of seconds to keep backlight om
ON_DEL=2	# Minimum number of seconds to keep backlight off
TIMO=3600	# Maximum number of seconds to wait for edge event
#
# Set for local policies
PRIO=local.info 		# if using rsyslog set priority
TAG=backlightd			# and tag to use on loghost
LOGFILE=/var/log/backlightd.log	# if using local syslog file

PATH=/bin:/usr/bin

# error handling
xit() { rlog "Line $1 Err $2 - $3  - exiting"; exit "$2"; }
die() { rlog "Exit signal received - exiting"; exit 0; }

# logging
case $1 in
	-r) rlog() { /usr/bin/logger -p "${PRIO}" -t "${TAG}" "$1"; } ;;
	 *) rlog() { /bin/echo "$1" >>"${LOGFILE}" ; } ;;
esac

cd / || xit $LINENO $? "Cannot cd to / ?!?"

reset(){
	# reset gpio pins, set initial conditions
	gpio edge "$PIR" both \
		|| xit $LINENO $? "Cannot set edge GPIO$PIR"
	gpio export "$BACKL" out \
		|| xit $LINENO $? "Cannot set export GPIO$BACKL"
	PIR_STATE=$(gpio -g read "$PIR") \
		|| xit $LINENO $? "Cannot read GPIO$PIR"
	gpio -g write "$BACKL" "$PIR_STATE" \
		|| xit $LINENO $? "Cannot write to GPIO$BACKL"
}

trap reset SIGUSR1
trap die   SIGTERM 

reset

while true
do
	timeout "$TIMO" gpio -g wfi "$PIR" both ; STAT=$?
	if [ "$STAT" -eq 124 ]; then
		rlog "gpio wfi timed out after ${TIMO}s - respawning" 
		STAT=0
	fi
	[ "$STAT" ] || xit $LINENO $STAT "gpio wfi terminated abnormally"
	PIR_STATE=$(gpio -g read "$PIR") \
		|| xit $LINENO $? "Cannot read GPIO$PIR"
	gpio -g write "$BACKL" "$PIR_STATE" \
		|| xit $LINENO $? "Cannot write GPIO$PIR"
	if [ "$PIR_STATE"  ]
		then sleep "$ON_DEL" 
		else sleep "$OFF_DEL"
	fi
done

[pugsly]

@DariBer Please see this document… this is how I use my PIR to turn off the screen when no one is in front of it.

https://www.thedigitalpictureframe.com/pir-motion-sensor-raspberry-pi-digital-picture-frame/