Read the statement by Michael Teeuw here.
MMM-OpenWeatherMapForecast stuck on Loading....
-
I did the code change in node_helpe.js, and the system now reports this error
[29.08.2022 10:34.06.199] [LOG] [MMM-OpenWeatherMapForecast] 29-Aug-22 10:34 ** bad status ** 401
my full config.js is this:
/* MagicMirror² Config Sample * * By Michael Teeuw https://michaelteeuw.nl * MIT Licensed. * * For more information on how you can configure this file * see https://docs.magicmirror.builders/configuration/introduction.html * and https://docs.magicmirror.builders/modules/configuration.html */ let config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080, basePath: "/", // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy // you must set the sub path here. basePath must end with a / ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], useHttps: false, // Support HTTPS or not, default "false" will use HTTP httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true language: "en", locale: "en-US", logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging timeFormat: 24, units: "metric", // serverOnly: true/false/"local" , // local for armv6l processors, default // starts serveronly and then starts chrome browser // false, default for all NON-armv6l devices // true, force serveronly mode, because you want to.. no UI on this device modules: [ { module: "weather", position: "top_right", header: "Weather Forecast", config: { weatherProvider: "openweathermap", type: "forecast", location: "Suwanee", locationID: "4225309", apiKey: "45fe452eea1fcfe3589cd5e8aa3f3f93" } }, { module: "MMM-OpenWeatherMapForecast", header: "Weather", position: "top_left", classes: "default everyone", disabled: false, config: { apikey: "45fe452eea1fcfe3589cd5e8aa3f3f93", latitude: "51.506130", longitude: "-0.090270", iconset: "4c", concise: false, forecastLayout: "table" } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") {module.exports = config;} -
@bassin12 yep… something…
both work for me… -
hm… I created a new key…
seems OpenWeatherForecast has a bug
in its node_helper.js
’
change"&units=" + payload.units +to (same as openWeatherMapForecast
(payload.units !== "" ? "&units=" + payload.units : "") +can’t pass in junk
-
@bassin12 if the apikey is valid, I get 401 as well…
using my (new) apikey… all ok…
-
@bassin12 with that api key data is coming back, but its in the wrong format
i switch to my apikey and all is good
-
@sdetweil I deleted the MMM-OpenWeatherMapForecast and reinstalled it as per the instructions. Results below, no change.
/home/pi/.pm2/logs/MagicMirror-out.log last 50 lines: 0|MagicMir | [30.08.2022 18:29.44.705] [INFO] Calendar-Fetcher: Broadcasting 6 events. 0|MagicMir | [30.08.2022 18:32.45.422] [INFO] Newsfeed-Fetcher: Broadcasting 35 items. 0|MagicMir | [30.08.2022 18:34.45.902] [INFO] Calendar-Fetcher: Broadcasting 6 events. 0|MagicMir | [30.08.2022 18:37.19.673] [LOG] [MMM-OpenWeatherMapForecast] 30-Aug-22 18:37 ** ERROR ** null 0|MagicMir | [30.08.2022 18:37.45.605] [INFO] Newsfeed-Fetcher: Broadcasting 35 items. 0|MagicMir | [30.08.2022 18:39.47.120] [INFO] Calendar-Fetcher: Broadcasting 6 events. 0|MagicMir | [30.08.2022 18:42.45.793] [INFO] Newsfeed-Fetcher: Broadcasting 35 items. 0|MagicMir | [30.08.2022 18:44.48.354] [INFO] Calendar-Fetcher: Broadcasting 6 events. 0|MagicMir | [30.08.2022 18:47.19.775] [LOG] [MMM-OpenWeatherMapForecast] 30-Aug-22 18:47 ** ERROR ** null 0|MagicMir | [30.08.2022 18:47.45.968] [INFO] Newsfeed-Fetcher: Broadcasting 35 items. 0|MagicMir | [30.08.2022 18:49.49.561] [INFO] Calendar-Fetcher: Broadcasting 6 events. 0|MagicMir | [30.08.2022 18:52.46.128] [INFO] Newsfeed-Fetcher: Broadcasting 35 items. 0|MagicMir | [30.08.2022 18:54.50.794] [INFO] Calendar-Fetcher: Broadcasting 6 events. 0|MagicMir | [30.08.2022 18:57.19.667] [LOG] [MMM-OpenWeatherMapForecast] 30-Aug-22 18:57 ** ERROR ** null 0|MagicMir | [30.08.2022 18:57.46.299] [INFO] Newsfeed-Fetcher: Broadcasting 35 items. 0|MagicMir | [30.08.2022 18:59.52.001] [INFO] Calendar-Fetcher: Broadcasting 6 events. 0|MagicMir | [30.08.2022 19:02.46.483] [INFO] Newsfeed-Fetcher: Broadcasting 35 items. 0|MagicMir | [30.08.2022 19:04.53.188] [INFO] Calendar-Fetcher: Broadcasting 6 events.
Am I doing anything wrong?
Ally
-
I think I was able to get to the bottom of this, you need to subscribe to the API giving your credit card information, also API 2.5 is deprecated for new users, I entered in contact with Open Weather and they have sent me this information.
Hope this helps people in the future.
-
@ally what instructions?
unless the author changed the code, nothing will change
-
@bassin12 said in MMM-OpenWeatherMapForecast stuck on Loading....:
I think I was able to get to the bottom of this, you need to subscribe to the API giving your credit card information, also API 2.5 is deprecated for new users, I entered in contact with Open Weather and they have sent me this information.
Hope this helps people in the future.
What service did you subscribe to, as that looks like the only way to enter your credit card info.
Ally
-
Hey @ally, I recently ran into the same problem like you.
I followed all instructions given to you from @sdetweil and finally figured out, what the problem was: openweathermap updated its api to version 3.0!
Even if you have a free subscription (limiting to 1000 api-calls a day, which is fine unless you stay above a refreshrate of every 3 minutes), you need to edit the link in node_helper.js fromvar url = "https://api.openweathermap.org/data/2.5/onecall" +to
var url = "https://api.openweathermap.org/data/3.0/onecall" +For the free subscription on API-Version 3.0, you need to provide your credit card information, but you can set the maximum of possible API-calls to 1000, so that you will never ever ran into any costs.
