MMM-InternetMonitor

Bungle68

@sdetweil always learning 👍

bhepler

@sdetweil thanks again, I now at last have the small meters showing, but now it’s not registering any speed at all 🤔 @bhepler, any suggestions?
It’s all zero?

I tried your configuration on my system and got this:

One thing I notice straight away is that your maximum speed is set to 1000 Mb/s. My fiber connection is rated at like 1/10th of that speed. I don’t know what kind of internet connection you have running to your house, but my guess is that you’re not seeing any data because your connection is just a sliver of the available graph.

Try this: set the maxGuageScale to 100 in your config.js entry.

Richtw

@bhepler
Hi - I am looking to replace my last mirror build with an updated one.

this module is throwing an error on my install. I suspect I must have gone astray in the install?
I started out with a clean install of raspbian and magic mirror
Started it up with the default settings and it seems to work fine

This was the first module I added

Commands I issued were:

cd MagicMirror/modules
git clone https://github.com/BrianHepler/internet-monitor.git
cd internet-monitor
NPM install showed some warnings:

added 191 packages, and audited 192 packages in 3m
9 packages are looking for funding
run npm fund for details
3 moderate severity vulnerabilities
To address all issues (including breaking changes), run:
npm audit fix --force
Run npm audit for details.

When I NPM start now it throws an error:

	[22.01.2023 15:19.07.139] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error 				found: Error: Cannot find module '/home/richard/MagicMirror/modules/internet-monitor/node_modules/lzma-native/			binding-v4.0.6-electron-v22.0-linux-arm64/lzma_native.node'
	Require stack:
	- /home/richard/MagicMirror/modules/internet-monitor/node_modules/lzma-native/index.js
	- /home/richard/MagicMirror/modules/internet-monitor/node_modules/decompress-tarxz/index.js
	- /home/richard/MagicMirror/modules/internet-monitor/node_modules/speedtest-net/index.js
	- /home/richard/MagicMirror/modules/internet-monitor/node_helper.js
	- /home/richard/MagicMirror/js/app.js
	- /home/richard/MagicMirror/js/electron.js
	- /home/richard/MagicMirror/node_modules/electron/dist/resources/default_app.asar/main.js

sdetweil

@Richtw the error is about 20 lines closer to the top

sdetweil

@Richtw said in MMM-InternetMonitor:

binding-v4.0.6-electron-v22.0-linux-arm64/lzma_native.node

looks like not built for arm and electron 22…

so, you could try this
create a file in the module home folder

cd ~/MagicMirror/modules/internet-monitor
touch buildit

then nano buildit, and paste this into the editor

#!/bin/bash

if [ ! -f ../../node_modules/.bin/electron-rebuild ]; then
	cd ../..
	npm install electron-rebuild >/dev/null 2>&1
	cd -
fi 
../../node_modules/.bin/electron-rebuild

ctrl-o to save, ctrl-x to exit

chmod +x buildit

then ./buildit

bhepler

@Richtw - Yeah, that error usually means that there is an error in your config.js file.

Couple suggestions:

Try this out in the MagicMirror folder: npm run config:check. It will let you know if there are any errors in your config.js file.
Post the relevant section of your config.js file in this thread. Be sure to use the markdown features of the forum for readability.

[Dammit, I am about this close to just deleting my repository. It’s not my module and I’m sick of fixing it.]

Richtw

@bhepler
thanks everyone for all the suggestions. Still stuck:
For the suggestion - @Richtw the error is about 20 lines closer to the top - Here’s the top
richard@raspberrypi:~/MagicMirror/config $ npm start

magicmirror@2.22.0 start
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js

[24.01.2023 17:51.15.999] [LOG] Starting MagicMirror: v2.22.0
[24.01.2023 17:51.16.006] [LOG] Loading config …
[24.01.2023 17:51.16.014] [LOG] Loading module helpers …
[24.01.2023 17:51.16.017] [LOG] No helper found for module: alert.
[24.01.2023 17:51.16.053] [LOG] Initializing new module helper …
[24.01.2023 17:51.16.054] [LOG] Module helper loaded: updatenotification
[24.01.2023 17:51.16.056] [LOG] No helper found for module: clock.
[24.01.2023 17:51.16.534] [LOG] Initializing new module helper …
[24.01.2023 17:51.16.535] [LOG] Module helper loaded: calendar
[24.01.2023 17:51.17.618] [ERROR] WARNING! Could not load config file. Starting with default configuration. Error found: Error: Cannot find module ‘/home/richard/MagicMirror/modules/internet-monitor/node_modules/lzma-native/binding-v4.0.6-electron-v22.0-linux-arm64/lzma_native.node’

For the suggestion - npm run config:check. I ran it and it did not find anything
Your configuration file doesn’t contain syntax errors :)

Here’s my config file

{
                        module: 'internet-monitor',
                        position: 'upper_third',
                        header: 'Internet Monitor',
                        config:{
                                type: '',
                                maxTime: 20000,
                                updateInterval: 30000,
                                verbose: false,
                                displayStrength: true,
                                displaySpeed: true,
                                strengthIconSize: 80,
                                maxGuageScale: 1000,
                        }
                },

I tried that buildit script but it kicked back with:
./buildit: line 8: …/…/node_modules/.bin/electron-rebuild: Permission denied

Running with sudo gave same result

sdetweil

@Richtw can you show results of

ls ~/MagicMirror/node_modules/.bin/electron-rebuild -laF

Richtw

@sdetweil said in MMM-InternetMonitor:

ls ~/MagicMirror/node_modules/.bin/electron-rebuild -laF

thanks for the reply!

richard@raspberrypi:~/MagicMirror $ ls ~/MagicMirror/node_modules/.bin/electron-rebuild -laF
lrwxrwxrwx 1 richard richard 34 Jan 24 17:57 /home/richard/MagicMirror/node_modules/.bin/electron-rebuild -> ../electron-rebuild/lib/src/cli.js

sdetweil

@Richtw weird.

edit the buildit script we wrote and add

-b

at end of the last line, w a space before it. see if we can find where it is have permissions error