Modifying the Config File

jimb

Guys,
It’s obvious that I am not specifying the correct item or leaving something out. It’s difficult because noe of the examples I’ve see "lay out’ the complete line of the config only some parts. I’ve played with different items changing them aroud and I get different reports from running in dev of either “401 no authorized” to “404 not found” on the string sent to weathermap. I am using the following-
apiVersion: “3.0”
location: “Houston”
locationID: “4699066”
apiKey: “xxx” a 32 digit hexadecimal received after registering.
I am not using the Lat or Lon at this time

sdetweil

@jimb weather is a pain in the rear. the providers are mess, openweather is the worst

I believe if you have the new API version you must set the endpoint:“/onecall”
AND then you MUST USE lat/lon

jimb

A lillte ray of sunshine… It 'apears" to be talking with operweather now since the MM display shows-

UNDEFINED

(wind symbol) 0 north INVALID DATE

NaN (degrees)

Feels like 32.0 degrees

WEATHER FORECAST UNDEFINED

I’m still getting 401 Unauthorized failed to load resource file. And getting other Cannot Read errors from openweather when using DEV option while running MM

sdetweil

@jimb can you post the complete module definition

xxx out the apikey field

jimb

Sam, here tis. I just noticed the string symbol ($) and the brackets ({}) in the apiKey. I found that in the instructions in MM. I didn’t try the config without them…

module: “weather”,
units: “imperial”,
windUnits: “imperial”,
tenpUnits: “imperial”,
position: 'top right",
config: {
apiVersion: “3.0”,
weatherProvider: “openweather”,
weatherEndpoint: “/onecall”,
lat: “33.50872”,
lon: “-96.612213”,
type: “current”,
location: “Houston”,
locationID: 4699066",
apiKey: “${xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx}”,
}
},
{
module: “weather”,
units: “imperial”,
windUnits: “imperial”,
tenpUnits: “imperial”,
position: 'top right",
config: {
apiVersion: “3.0”,
weatherProvider: “openweather”,
weatherEndpoint: “/onecall”,
lat: “33.50872”,
lon:" -96.612213",
type: “current”,
location: “Houston”,
locationID: 4699066",
apiKey: “${xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx}”,

sdetweil

@jimb I don’t understand that comment about $[] as the sample looks like this

please take those characters off, it should just be the text provided by openweather, in quotes

jimb

Sam, this was from one source (above that you pasted). Mo config with the weather data is above that and includes the items I mentioned. BTW, I keyed it separately as I am unable to paste from the Rasberry Pi to my windows PC.

sdetweil

@jimb on the pi desktop, menu top left
preferences, pi preferences.
interfaces, check ssh on. ok,
change host name, just look at it, should be raspberrypi

then save/exit, reboot

on your PC do

ssh pi@raspberrypi

if the userid you created on the pi is pi.

use the password you set when you booted the first time

now you have a terminal on the pi from your PC, and you can copy/paste in both directions…

jimb

Sam, I remember the name I gave to the Pi, but unfortunately not the password. Is there a way to find it?

sdetweil

@jimb np, but you should be able to change it from the preferences without knowing it