MMM-Pir Issue

[Feedy88]

Hi all,

I have issues with the MMM-Pir module. I recently finished my mirror and put it onto the wall which all worked fine but it randomly shutdown. I have no idea why that happend but I found out it happend when I manage the start of Magic Mirror with pm2, but not when manually starting with “npm run” in a screen or with nohup, so I decided to move away from pm2 and created a systemd unit instad. So far, so good.

As I didn’t need pm2 I removed it from the raspi. Starting the Mirror with the Unit work fine but on Startup I see an Error Message from the PIR module that 1 needed Library is not loaded. The popup on top on starting up shows it is onoff. I tried rebuilding MMM-Pir and also manually installing onoff with the global flag but no with no avail.

So the main two changes between WAI and not working at all are

• Uninstall of pm2
• changing the address in the config from localhost to 0.0.0.0

Config for Pir Module:

{
	module: 'MMM-Pir',
	position: 'top_right',
	config: {
	  debug: false,
	  delay: 2 * 60 * 1000,
	  turnOffDisplay: true,
	  mode: 9,
	  ecoMode: true,
	  displayCounter: true,
	  displayBar: true,
	  displayStyle: "Text",
	  displayLastPresence: tru
	  lastPresenceTimeFormat: 
	  mode6_gpio: 20,
	  mode6_clearGpioValue: tr
	  pir_gpio: 18,
	  pir_reverseValue: false,
	  xrandrForceRotation: "no
	  //wrandrForceRotation: "
	}
  }, 

Can anyone help how I can get the Pir Module woring again? Happy to provide logs and config if needed. Thanks!

[kayakbabe]

@Feedy88 said in MMM-Pir Issue:

localhost to 0.0.0.0

localhost is normally the same as 127.0.0.1 for most computers. Why are you wanting it to be 0.0.0.0?

[bugsounet]

Hi, npm run rebuild command inside MMM-Pir folder will help

[Feedy88]

This post is deleted!