MM-Watcher - MagicMirror Config.js Auto-Refresh Script

chrisfr1976

@sdetweil thats why I made the module. The Pi is completely headless. So I’m in the kitchen with my laptop and enjoy this autorefresh now. Before that I’ve used a Script on my Smartphone. Also manual and annoying :-)
And sure, also the xdotool command is just pressing “ctrl+r” for me.

plainbroke

@chrisfr1976

       {
            "name":"mm",
            "script":"./mm.sh",
            "cwd":"/home/pi",
            "watch":[
                "//home/pi/MagicMirror/css/custom.css",
                "/home/pi/MagicMirror/config/config.js"
            ],
}

I use a file called mm.json ,don’t remember where I got this info, but it still works great. I have it and a copy of the mm.sh in the /home/pi/ folder… the one your setup goes to when you do cd then enter.
this is the code inside it.
pm2 delete all that have to do with MagicMirror startup.
Then do a pm2 start mm.json then pm2 save and PM2 saves it as mm.
Now anytime I change something in config.js MagicMirror restarts.
I wish I was smart enough with code to figure out how to get it to restart when I modify the custom.css too.

sdetweil

@plainbroke great!!! i will fix my json file !!!thanks

chrisfr1976

@plainbroke
Hi,
my mm.sh also restarts the mirror. But my intention with was doing only a refresh to save a lot of time. My restarts script sleeps 15s before it is executed. So i created a seperate refresh script.

plainbroke

@chrisfr1976
Ok mine doesn’t wait. I usually do a list of changes I have researched.
So the complete restart of MM is ok for me.
Right now trying to figure out a couple of modules that are not loading…

sdetweil

@plainbroke interesting, my file and your have just two changes

you have the cwd: setting
you have followSymlinks (which we don’t have any of)

I added cwd to mine and now MM restarts… weird

plainbroke

@sdetweil
Glad it works for you.
I have no Idea where it came from. I would guess from someone on this forum.

sdetweil

@plainbroke well, mine looks nearly identical… just missing the cwd…

I opened an issue about this 2 years ago, never got a response…
and adding cwd (current working directory)

I don’t know how that matters… but whatever… it works now…

magicmikael

@sdetweil or @chrisfr1976 , I am using Wayland instead of x11 and my display is undefined.

From MagicMirror, using node --run start:x11 everything works just fine with a refresh script referencing export DISPLAY=:0.0 && xdotool key ctrl+r.

My startup script however uses Wayland and then I run into issues. Have you ran this on wayland successfully?

sdetweil

@magicmikael pm2 is supposed to be able to do this too. But altho I set it up during pm2 setup in my scripts it doesn’t work