2.32.0 Calendar module limitDays and excludedEvents stopped working

AndyHazz

@KristjanESPERANTO I’ve been able to update MMM-Remote-Control to 3.2.0 and you were right that stops the errors I was getting in the logs when running docker compose up.

Still doesn’t look like there are any clues there for my calendar issues though …

docker compose up > somenewfile.txt                                                                                                                                                  ─╯
[+] Running 6/6
 ✔ Network magicmirror_default  Created0.2s
 ✔ Container xserver            Created0.8s
 ✔ Container watchtower         Created0.7s
 ✔ Container init               Created0.8s
 ✔ Container mm                 Created0.2s
 ✔ Container mmpm               Created0.2s
xserver     |
xserver     | X.Org X Server 1.21.1.14
xserver     | X Protocol Version 11, Revision 0
xserver     | Current Operating System: Linux 2133690aa282 6.12.34+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.12.34-1+rpt1~bookworm (2025-06-26) aarch64
xserver     | Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=de21c80a-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=GB video=HDMI-A-1:1920x1080M@60,rotate=270
xserver     |
xserver     | Current version of pixman: 0.43.4
xserver     |   Before reporting problems, check http://wiki.x.org
xserver     |   to make sure that you have the latest version.
xserver     | Markers: (--) probed, (**) from config file, (==) default setting,
xserver     |   (++) from command line, (!!) notice, (II) informational,
xserver     |   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
xserver     | (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul  8 21:49:11 2025
xserver     | (==) Using system config directory "/usr/share/X11/xorg.conf.d"
watchtower  | time="2025-07-08T21:49:12Z" level=info msg="Watchtower 1.7.1"
watchtower  | time="2025-07-08T21:49:12Z" level=info msg="Using no notifications"
watchtower  | time="2025-07-08T21:49:12Z" level=info msg="Checking all containers (except explicitly disabled with label)"
watchtower  | time="2025-07-08T21:49:12Z" level=info msg="Scheduling first run: 2025-07-15 21:49:12 +0000 UTC"
watchtower  | time="2025-07-08T21:49:12Z" level=info msg="Note that the first check will be performed in 167 hours, 59 minutes, 59 seconds"
mm          | [2025-07-08 22:50:02.823] [WARN]  You're using a full whitelist configuration to allow for all IPs
mm          | [2025-07-08 22:50:26.661] [ERROR] table not found in HTML.
mm          | [2025-07-08 22:50:26.684] [ERROR] table not found in HTML.
mm          | [2025-07-08 22:50:26.765] [ERROR] Tue Jul 08 2025 22:50:26 GMT+0100 (British Summer Time) - WatchDog: Heartbeat timeout. Frontend might have crashed. Exit now.
mm          | [2025-07-08 22:50:26.873] [ERROR] table not found in HTML.
mm          | [2025-07-08 22:50:26.888] [ERROR] table not found in HTML.
mm          | npm notice
mm          | npm notice New major version of npm available! 10.9.2 -> 11.4.2
mm          | npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.4.2
mm          | npm notice To update run: npm install -g npm@11.4.2
mm          | npm notice
mm          | [2025-07-08 22:50:56.210] [WARN]  You're using a full whitelist configuration to allow for all IPs
mm          | [2025-07-08 22:51:04.036] [ERROR] table not found in HTML.
mm          | [2025-07-08 22:51:04.866] [ERROR] Tue Jul 08 2025 22:51:04 GMT+0100 (British Summer Time) - WatchDog: Heartbeat timeout. Frontend might have crashed. Exit now.
mm          | [2025-07-08 22:51:24.381] [WARN]  You're using a full whitelist configuration to allow for all IPs
mm          | [2025-07-08 22:51:42.944] [ERROR] table not found in HTML.
mm          | [2025-07-08 22:51:42.966] [ERROR] table not found in HTML.
mm          | [2025-07-08 22:52:10.109] [ERROR] table not found in HTML.
mm          | [2025-07-08 22:52:11.413] [ERROR] table not found in HTML.

I think the repeating ‘table not found in HTML’ error is just from my MMM-Scrapey module, as it’s looking for bus times and it’s late, the last bus has gone.

KristjanESPERANTO

@AndyHazz Unfortunately, I don’t know if I can help any further here. The error message ([ERROR] table not found in HTML.) is indeed from MMM-Scrapey - I have created a pull request for the module to improve logging, at least in the future.

AndyHazz

Thanks, I’ve merged that logging improvement to MMM-Scrapey.

I suppose my query is simply whether anybody else can see the same calendar functionality issues as me?

limitDays has changed to limit the number of calendar items, not the number of days worth of calendar items
excludedEvents appears to do nothing any more, events matching excluded words have started showing when prior to 2.32.0 they were hidden

If it’s only affecting me, I’ll probably try rebuilding my setup from scratch.

sdetweil

@AndyHazz what release were you on prior to the upgrade?

I don’t see any code change from 2.31
| correction, there is a test of date after change here.

sdetweil

@AndyHazz can you show your calendar config, xxx out the URLs.

sdetweil

@AndyHazz I should note that this property is NOT a sequential limit of days from today

it is UNIQUE days INCLUDING today
limitDays:2
so if there no events til next Thursday, that is the 1st day
and no events til the following Tuesday, that is the second day

which is different than event tomorrow and saturday, but only show tomorrow… (2 consecutive days gets today and tomorrow), or two days from NOW gets today/thurs/friday, but still not saturday.

AndyHazz

@sdetweil yeah that’s what I was using limitDays for and it was working great for my needs until now - I have my kids school lessons synced to a google calendar, and setting limitDays to 1 used to show the full set of lessons for the day. When they get home from school (all events from the current day are in the past), it automatically showed all of the lessons for the following day. Best thing I’ve ever used MM for! Even highlights PE lessons so they know when to bring kit :)

For me now, limitDays: 1 just shows the single next event even when there are 6 more events on that day (and if that event is ‘Tutor time’, it displays when it should be hidden).

I can’t say exactly what version I was on prior to the update but it should have been whatever the previous version was - since I set this up with watchtower in docker I’ve not had to do any manual upgrades.

Here’s my anonamised calendar config - I have 5 different calendar modules running if that’s likely to be a factor, but this is one that has the config issues:

    {
        module: 'calendar',
        header: 'School day',
        position: 'bottom_right',
        config: {
            coloredSymbol: true,
            coloredText: true,
            showLocation: true,
            displaySymbol: false,
            hideTime: true,
            tableClass: 'medium',
            flipDateHeaderTitle: true,
            fade: false,
            timeFormat: 'absolute',
            dateFormat: 'ddd',
            fullDayEventDateFormat: 'ddd',
            urgency: '0',
            sliceMultiDayEvents: true,
            nextDaysRelative: false,
            limitDays: 1,
            fetchInterval: '600000',
            displayRepeatingCountTitle: true,
            wrapEvents: false,
            //maxTitleLength: 30,
            customEvents: [{ keyword: 'Physical Education', symbol: 'volleyball', color: 'Gold' }],
            excludedEvents: [
                'Tutor time'
            ],
            calendars: [
                {
                    symbol: 'graduation-cap',
                    url: 'https://calendar.google.com/calendar/ical/REDACTED/basic.ics'
                }
            ]
        }
    },

mumblebaj

@AndyHazz Do you mind sharing your ICS, anonymized off course.

sdetweil

@AndyHazz found it…

comparing date AND TIME oops…

edit modules/default/calendar/calendar.js
approx line 708
change the lines marked below with //

		if (this.config.limitDays > 0) {
			let newEvents = [];
			let lastDate = today.clone().subtract(1, "days").startOf('day');  // add .startOf('day'), note dot
			let days = 0;
			for (const ev of events) {
				let eventDate = this.timestampToMoment(ev.startDate).startOf('day'); // add .startOf('day'), note dot

AndyHazz

@sdetweil nice! Yes that’s fixed the limitDays issue for me …

Now, how about part 2 of my issue, the excludedEvents config? The first event showing for me is titled ‘Tutor time’ despite that string being excluded. I’ve tried other terms with/without spaces and nothing seems to work to exclude events any more?