Read the statement by Michael Teeuw here.
PIR-Sensor - put your mirror to sleep if not used
-
@paviro I had to downgrade to node 5.0.0, I confirmed its that version of node. After the downgrade I removed the PIR module and did a git clone and then npm install in the folder. Still the same thing, is there a specific version of node 5 I should be using or a specific version of npm?
I’m running it from
/home/pi/MagicMirror/modules/MMM-PIR-Sensor -
Could you try it with
node serveronly? -
@joerod also do
npm installon the mm folder or install the whole thing from scratch :) -
@paviro as a feedback: i used the latest MMM branch and yours and it is working fine with my PIR sensor on a rpi2. I didn’t had to downgrade anything to node 5 (and i also don’t know what it is :D ) Thanks for your work. It is so great that the mirror is starting if a presence is detected!!
-
@DirkS glad to hear! :)
-
Hey Everyone!
I am trying to use this module to turn off/on a tv and im having a bit of trouble on the physical end of things… I got the module working perfectly (tested it with PIR and hdmi on/off). Now I am trying to use a relay with the PIR sensor to have the TV screen itself turn on and off. I was planning on wiring this to the TV power button (so it is essentially the same as pressing the on/off button).I got the relay working… and I was about to take apart my tv when i thought…will even work for the on/off button? When it senses movement it will send the signal and then … turn off the tv I guess. As soon as the movement is undetected it stops sending the signal (or really pulse in this case)… just stopping wouldn’t turn the tv back on either. I guess it needs to send a pulse when it stops detecting movement, and then another one when it does again. Am I thinking about this wrong? Should I wire it to something else? Thanks in advance
-
@MechMatt On second thought, im having trouble with the relay as well… could you post a wiring diagram for the pi, relay, and tv? I’m not the best at electronics
-
To be honest the relay thing does not work that we’ll yet, still have to figure out some stuff related to how the Pi reacts when a monitor gets turned on after the boot process and not before.
As to your TV on/off button thing. The module simply puts s
3.3 voltson the configured Pin if the relay should be on and sets it back to0 voltsif it should be off. You can also configure it the other way around. Since I do not now how your TV button is wired I have no idea wheather it would work with this module without modifying some parts. -
I’ve been using a python script to achieve this functionality, its worked well for me so far. I make sure the script is run at start up.
https://github.com/joerod/python/blob/master/raspberry_pi/motion.py
-
That’s exactly what this module does :)
