[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

evroom

@Number_5 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

subtype=1 with h264

Can you try the subtype=1 option and remove the --info part from the command?

Number_5

@evroom said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

omxplayer --info --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd ‘rtsp://xxx.xxx@192.168.2.108:554/cam/realmonitor?channel=2&subtype=0’

Hello evroom,

you are the best. now its working!

thanks all for your support. and thanks all for your patience in the past nights.

pi@raspberrypi:~/MagicMirror/config $ omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://admin:RoKu1234@192.168.2.108:554/cam/realmonitor?channel=1&subtype=0'
Video codec omx-h264 width 1920 height 1080 profile 77 fps 30.000000
Subtitle count: 0, state: off, index: 1, delay: 0
V:PortSettingsChanged: 1920x1080@30.00 interlace:0 deinterlace:0 anaglyph:0 par:1.00 display:0 layer:0 alpha:255 aspectMode:0

I have put tbe url in the config.js

{
  module: "MMM-RTSPStream",
   position: "middle_center",
   header: "Test Kamera",
       config: {
       autoStart: true,
       rotateStreams: true,
       rotateStreamTimeout: 10,
       moduleWidth: 354,
       moduleHeight: 240,
       localPlayer: 'omxplayer',
       remotePlayer: 'none',
       showSnapWhenPaused: true,
       remoteSnaps: true,
       stream1: {
           name: 'door',
           url: 'rtsp://XXX:XXX@192.168.2.108:554/cam/realmonitor?channel=1&subtype=0',
           frameRate: 'undefined',
           snapshotType: 'url',
           snapshotRefresh: 10,
          width: undefined,
           height: undefined,
           },
       }
  },

with

pm2 stop MagicMirror

the mirror stops, but not the stream from the camerea.
Only with the command

pm2 stop 1

the stream stops.

sdetweil

@Number_5 you need to write a little script to do pm2 stop 1, then pm2 stop 0

evroom

@Number_5 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

now its working!

Great to hear!

When you add

omxRestart: 1,

in the

config: {

part, then when restarting MagicMirror, the omx_stream1 will be stopped and restarted too.
If you really want to stop MagicMirror and omx_stream1, then you will need to stop both:

pm2 stop MagicMirror
pm2 stop omx_stream1

Provided that you named you stream1 stream1.

Number_5

@sdetweil

hello sam,
Thank you. You opened the door for me a few days ago. writing small and large scripts will be my next challenge :-). for the first one ,i took up the suggestion from evroom. I hope you will help me with the next projects, :-)

Egnos

Hello to all,
I congratulate the developer of this module which, if I manage to make it work, will be very useful to me! :smiling_face_with_open_mouth_smiling_eyes:

I describe my environment:
I’m testing the various modules on a virtual machine (Virtual Box) that runs on a Windows 10 PC.
For now all modules work perfectly except MMM-RTSPStream.

Description of the problem:
I followed the installation guide at this link.

When dependencies are installed the installation fails

Cloning the repository on master branch...

Cloning into 'MMM-RTSPStream'...
remote: Enumerating objects: 16, done.
remote: Counting objects: 100% (16/16), done.
remote: Compressing objects: 100% (14/14), done.
remote: Total 315 (delta 5), reused 6 (delta 2), pack-reused 299
Ricezione degli oggetti: 100% (315/315), 1.13 MiB | 876.00 KiB/s, done.
Risoluzione dei delta: 100% (192/192), done.

Installing dependencies...


> MMM-RTSPStream@2.0.2-dev preinstall /home/pi/MagicMirror/modules/MMM-RTSPStream
> ./scripts/preinstall.sh

Updating packages ...
Trovato:1 http://security.debian.org stretch/updates InRelease
Trovato:2 http://archive.raspberrypi.org/debian stretch InRelease              
Ign:3 http://ftp.debian.org/debian stretch InRelease                           
Trovato:4 http://ftp.debian.org/debian stretch-updates InRelease
Trovato:5 https://deb.nodesource.com/node_10.x stretch InRelease
Trovato:6 http://ftp.debian.org/debian stretch Release
Lettura elenco dei pacchetti... Fatto                 
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
152 pacchetti possono essere aggiornati: eseguire "apt list --upgradable" per vederli.

Installing helper tools: devilspie2 and wmctrl...
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze       
Lettura informazioni sullo stato... Fatto
E: Impossibile trovare il pacchetto omxplayer
npm ERR! code ELIFECYCLE
npm ERR! errno 100
npm ERR! MMM-RTSPStream@2.0.2-dev preinstall: `./scripts/preinstall.sh`
npm ERR! Exit status 100
npm ERR! 
npm ERR! Failed at the MMM-RTSPStream@2.0.2-dev preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm WARN Local package.json exists, but node_modules missing, did you mean to install?

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2020-02-20T11_38_51_172Z-debug.log
Failed to install dependencies.

Can you help me?

Thank you all

evroom

@Egnos said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

E: Impossibile trovare il pacchetto omxplayer

To me it looks like it cannot install omxplayer.
You can try to install it manually.
The script does it using this command:

sudo apt install -y omxplayer

Perhaps another command is needed, or indeed the package to install omxplayer does not exist for your platform.

BKeyport

evroom’s got it right. OMXplayer isn’t being installed. I understand it went under a few management changes, so it could be trying to access an old version or something. RTSPStream’s clunky enough that you might find it easier (and better) to run OMXplayer independently of the mirror, like evroom has done, as have I.

see earlier in this thread: https://forum.magicmirror.builders/topic/2743/mmm-rtspstream-video-streaming-from-live-feeds-security-cameras/259

steps really to take RTSP-Stream out and run OMX directly:

Find the resolution of your screen so you know your range. (1920x1080 in my case)
Figure out the resolution of the stream. (640x360 in my case)
figure out where on the screen you want it using the top left corner, this would become your X1 and Y1 (I wanted it in the upper right corner, so, that was rather easy)
Add width of your stream to X1 for X2, height of your stream to Y1 for Y2.
omx player will likely need the following commands: “–avdict rtsp_transport:tcp --live --fps 30” as well as the following
The “–win” command string is “X1 Y1 X2 Y2”
If you have your screen rotated, and omxplayer doesn’t play along (it likely wont), add “–orientation” and how many degrees to twist (90 = portrait “right”, 180 = landscape “upside down”, 270 Portrait “Left”) command line, and adjust X and Y calculations for 90 or 270 rotation. The X and Y will remain as if the screen isn’t rotated.

I used the first one of these, but the other 3 is as rotated for the same corner.
omxplayer --avdict rtsp_transport:tcp --live --fps 30 --orientation 0 --win “1280 0 1920 360” [url]
omxplayer --avdict rtsp_transport:tcp --live --fps 30 --orientation 90 --win “1560 0 1920 640” [url]
omxplayer --avdict rtsp_transport:tcp --live --fps 30 --orientation 180 --win “1280 0 1920 360” [url]
omxplayer --avdict rtsp_transport:tcp --live --fps 30 --orientation 270 --win “1560 0 1920 640” [url]

Egnos

Thanks a loro @BKeyport and @evroom!
In a few days I will try your advice.

@BKeyport said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

RTSPStream’s clunky enough that you might find it easier (and better) to run OMXplayer independently of the mirror, like evroom has done, as have I.

does this mean i have to uninstall the module RTSPStream’s and install only the component OMXplayer?

Thanks

evroom

@Egnos said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

does this mean i have to uninstall the module RTSPStream’s and install only the component OMXplayer?

If you are able to install OMXPlayer, then you can give MMM-RTSPStream a try.
In principle it does work, depending on what you want to stream.
If it works for you, perfect, if it doesn’t, then try if omxplayer works standalone,
Actually testing omxplayer standalone is always a good thing before trying out MMM-RTSPStream.