Read the statement by Michael Teeuw here.
Problem with MMM-ResRobot, it wont start(?)
-
@Eburkis
You should use “ResRobot - Reseplanerare" and create a API for that service instead of “platsuppslag”.
i get ID: 740024784 and name “Lidingö Rudboda torg” when i search for Rudboda torgBR
Andreas -
i will try. tnx for the help, have a nice evening
-
@atd08001
now i want to completly give up… now with the new site id its still does not work. now it’s just black with no info at all.
what should i do ?{ module: "MMM-ResRobot", position: "left", header: "Departures", config: { from: "740024784", // ResRobot Station ID (or a comma-separated string of IDs) to: "740046172", // ResRobot Station ID of destination (or a comma-separated string of IDs) skipMinutes: 0, // Skip departures that happens within the next minutes. maximumEntries: 6, // Number of departures to show on screen truncateAfter: 5, // A value > 0 will truncate direction name at first space after characters. 0 = no truncation apiKey: "key here" // Your ResRobot apiKey } },
-
@Eburkis I sent you my config via PM. If you use that with your AKIKey it should work. Otherwise there must be a error with your key.
Hm…could it be something with your router, could it block sites? I had a similar problems once and I had a familly filter active on my router.
-
@Eburkis said in Problem with MMM-ResRobot, it wont start(?):
yeey somthing works now
now when the MM boots it says Fetching data for almost 3 sec then it goes black and now its just “departures” and under that its empty. so its almost that it is no departures at all -
@Eburkis et al
I’ve just pushed a long-overdue update to MMM-ResRobot to github.This new version has a completely reworked updating logic which should result in less “frozen” updates and also less API calls to Trafiklab/ResRobot over time.
Note that there is a breaking change to the configuration as I’ve changed the way routes are defined.
Previous configuration:from: "from1,from2,from3", to: "to1,,to3"
New configuration:
routes: [ {from: "from1", to: "to1"}, {from: "from2", to: ""}, {from: "from3", to: "to3"}, ]
Sorry for not pushing the update sooner but my mirror project has been delayed due to other things. Will try to update more frequently in the future. Please drop me a note if you encounter issues!
-
Hi there,
I fail to get the new config format to work.
I use the following block:
{ module: "MMM-ResRobot", position: "top_left", header: "Departures", config: { routes: [ from: "740015972", to: "740061189", ] skipMinutes: 0, maximumEntries: 6, truncateAfter: 5, apiKey: "xxxxx" } },
but MagicMirror2 fails to start with following message:
WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.
(If I use the old config syntax for routes, the system starts up as before, but I get departures from some default location that seems like Stockholm C.)
What could I have done wrong?
-
I got it to work by adding an extra level of curly brackets and a comma after the closing square bracket:
{ module: "MMM-ResRobot", position: "top_left", header: "Departures", config: { routes: [ { from: "740015972", to: "740061189" } ], skipMinutes: 0, maximumEntries: 6, truncateAfter: 5, apiKey: "xxxx" } },
Is the example config on https://github.com/Alvinger/MMM-ResRobot incorrect?
-
@ajomannen sorry, the curly braces got lost in my copying. I have updated my previous post.
-
I can not get it working either, says fetching for quite some time now. I get a “MMM-ResRobot : Error: got 400 response” on starting server… strange. Anyone recognize the same output?
{ module: "MMM-ResRobot", position: "top_right", header: "Departures", config: { routes: [ {from: "740021656", to: "740020749"}, // ResRobot Station IDs of starting and destination station(s). At least one route must be defined. {from: "740000765", to: "740000284"}, // "from" is required but "to" is optional (set "to" to empty string to indicate all destinations) ], skipMinutes: 0, // Skip departures that happens within the next minutes. maximumEntries: 6, // Number of departures to show on screen truncateAfter: 5, // A value > 0 will truncate direction name at first space after characters. 0 = no truncation apiKey: "1c01e8b8-92d0-4e05-86dc-a112d743ba5a" // Your ResRobot apiKey } },