Problem with MMM-ResRobot, it wont start(?)

[Eburkis]

i will try. tnx for the help, have a nice evening

[Eburkis]

@atd08001
now i want to completly give up… now with the new site id its still does not work. now it’s just black with no info at all.
what should i do ?

{
		module: "MMM-ResRobot",
		position: "left",
		header: "Departures",
		config: {
			from: "740024784",		// ResRobot Station ID (or a comma-separated string of IDs)
			to: "740046172",			// ResRobot Station ID of destination (or a comma-separated string of IDs)
			skipMinutes: 0,		// Skip departures that happens within the next  minutes.
			maximumEntries: 6,	// Number of departures to show on screen
			truncateAfter: 5,	// A value > 0 will truncate direction name at first space after  characters. 0 = no truncation
			apiKey: "key here"		// Your ResRobot apiKey
			}
		},

[Nybbe67]

@Eburkis I sent you my config via PM. If you use that with your AKIKey it should work. Otherwise there must be a error with your key.

Hm…could it be something with your router, could it block sites? I had a similar problems once and I had a familly filter active on my router.

[Eburkis]

@Eburkis said in Problem with MMM-ResRobot, it wont start(?):

yeey somthing works now
now when the MM boots it says Fetching data for almost 3 sec then it goes black and now its just “departures” and under that its empty. so its almost that it is no departures at all

[Alvinger]

@Eburkis et al
I’ve just pushed a long-overdue update to MMM-ResRobot to github.

This new version has a completely reworked updating logic which should result in less “frozen” updates and also less API calls to Trafiklab/ResRobot over time.

Note that there is a breaking change to the configuration as I’ve changed the way routes are defined.
Previous configuration:

from: "from1,from2,from3",
to: "to1,,to3"

New configuration:

routes: [
  {from: "from1", to: "to1"},
  {from: "from2", to: ""},
  {from: "from3", to: "to3"},
]

Sorry for not pushing the update sooner but my mirror project has been delayed due to other things. Will try to update more frequently in the future. Please drop me a note if you encounter issues!

[ajomannen]

@Alvinger

Hi there,

I fail to get the new config format to work.

I use the following block:

{
	module: "MMM-ResRobot",
	position: "top_left",
	header: "Departures",
	
	config: {
		routes: [
			from: "740015972", to: "740061189",
		]
		skipMinutes: 0,
		maximumEntries: 6,
		truncateAfter: 5,
		apiKey: "xxxxx"
	}
},

but MagicMirror2 fails to start with following message:

WARNING! Could not validate config file. Please correct syntax errors. Starting with default configuration.

(If I use the old config syntax for routes, the system starts up as before, but I get departures from some default location that seems like Stockholm C.)

What could I have done wrong?

[ajomannen]

@ajomannen

I got it to work by adding an extra level of curly brackets and a comma after the closing square bracket:

{
	module: "MMM-ResRobot",
	position: "top_left",
	header: "Departures",
	
	config: {
		routes: [
			{
				from: "740015972", to: "740061189"
			}
		],
		skipMinutes: 0,
		maximumEntries: 6,
		truncateAfter: 5,
		apiKey: "xxxx"
	}
},

Is the example config on https://github.com/Alvinger/MMM-ResRobot incorrect?

[Alvinger]

@ajomannen sorry, the curly braces got lost in my copying. I have updated my previous post.

[Gailby]

I can not get it working either, says fetching for quite some time now. I get a “MMM-ResRobot : Error: got 400 response” on starting server… strange. Anyone recognize the same output?

            {
                    module: "MMM-ResRobot",
                    position: "top_right",
                    header: "Departures",
                    config: {
                            routes: [
                                    {from: "740021656", to: "740020749"},   // ResRobot Station IDs of starting and destination station(s). At least one route must be defined.
                                    {from: "740000765", to: "740000284"},   // "from" is required but "to" is optional (set "to" to empty string to indicate all destinations)
                            ],
                                    skipMinutes: 0,         // Skip departures that happens within the next  minutes.
                                    maximumEntries: 6,      // Number of departures to show on screen
                                    truncateAfter: 5,       // A value > 0 will truncate direction name at first space after  characters. 0 = no truncation
                                    apiKey: "1c01e8b8-92d0-4e05-86dc-a112d743ba5a"  // Your ResRobot apiKey
                    }
            },

[Gailby]

Ok, seems it didn’t want to handle several departures like previous post but only one:

            {
                    module: "MMM-ResRobot",
                    position: "top_right",
                    header: "Departures",
                    config: {
                            routes: [
                                    {from: "740000765", to: "740000284"}    // "from" is required but "to" is optional (set "to" to empty string to indicate all destinations)
                            ],
                                    skipMinutes: 0,         // Skip departures that happens within the next  minutes.
                                    maximumEntries: 6,      // Number of departures to show on screen
                                    truncateAfter: 5,       // A value > 0 will truncate direction name at first space after  characters. 0 = no truncation
                                    apiKey: "1c01e8b8-92d0-4e05-86dc-a112d743ba5a"  // Your ResRobot apiKey
                    }
            },

Still get error response:
node_helper for MMM-ResRobot received a socket notification: CONFIG - Payload: {“updateInterval”:300000,“animationSpeed”:2000,“fade”:true,“fadePoint”:0.25,“apiBase”:“https://api.resrobot.se/v2/departureBoard?format=json&passlist=0",“apiKey”:“1c01e8b8-92d0-4e05-86dc-a112d743ba5a”,“routes”:[{“from”:“740000765”,“to”:“740000284”}],“skipMinutes”:0,“maximumEntries”:6,“truncateAfter”:5,“iconTable”:{“B”:"fa fa-bus”,“S”:“fa fa-subway”,“J”:“fa fa-train”,“U”:“fa fa-subway”,“F”:“fa fa-ship”}}
Fetching new departure data for module: MMM-ResRobot
[…]
node_helper for MMM-ResRobot received a socket notification: CONFIG - Payload: {“updateInterval”:300000,“animationSpeed”:2000,“fade”:true,“fadePoint”:0.25,“apiBase”:“https://api.resrobot.se/v2/departureBoard?format=json&passlist=0",“apiKey”:“1c01e8b8-92d0-4e05-86dc-a112d743ba5a”,“routes”:[{“from”:“740021656”,“to”:“740020749”}],“skipMinutes”:0,“maximumEntries”:6,“truncateAfter”:5,“iconTable”:{“B”:"fa fa-bus”,“S”:“fa fa-subway”,“J”:“fa fa-train”,“U”:“fa fa-subway”,“F”:“fa fa-ship”}}
MMM-ResRobot : Error: got 400 response