Read the statement by Michael Teeuw here.
Further development of the MMM-Swipe module
-
You may also be interested in my gesture sensor module: https://github.com/thobach/MMM-Gestures, which is based on infra red, which I found more reliable and silent :) I developed it after a couple of iterations with ultra sonic sensors like the HC SR04, which didn’t satisfy my needs.
-
@thobach hello, the plugin looks more accurate is it easy to set up?
can you show me a picture of the wiring?
I do not know if I will be able to install it,
it most difficult like MMM-Swipe no ? -
@thobach lets go i buy this : https://www.amazon.fr/WINGONEER-APDS-9960-ambiante-détection-mouvement/dp/B071VS21M4/ and https://www.ebay.fr/itm/GP2Y0A21YK0F-Capteur-distance-infrarouge-analogique-ARDUINO-robot-IR-SHARP-GP2/292499905194?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 i wait my product and i try ;)
-
@nawak86 Unfortunately, it is probably one of the most difficult modules as it consists of two sensors and an Arduino connected to the Pi. The wiring is described at https://github.com/thobach/MMM-Gestures/blob/master/Arduino/MagicMirror2/MagicMirror2.ino#L31 (Arduino) and https://github.com/thobach/MMM-Gestures/blob/master/README.MD. I don’t have a wiring picture.
You can see it in action though on https://www.youtube.com/watch?v=V8a6UgeoYOU.
-
@thobach f*ck i dont see hardware who is required before !! so i must buy an arduino one can you tell me if it is that : https://www.amazon.fr/Elegoo-Carte-ATmega328P-ATMEGA16U2-Arduino/dp/B01N91PVIS/ ??? infact just plug sensor on arduino send library by software and connect to the raspberry with usb and git clone module et npm install ? for the movement it works with MMM-Pages ? sorry i’m a noob with that ;)
-
Hi @nawak86, after setting up the two HC-SR04 sensors, I am not very happy with its performance. It basically works, also with the Pages module.
It sounds like @thobach is pretty happy with his gestures module (even you need an Arduino besides the Pi, right?).
Here is a picture of how I integrated the sensors into my mirror, I could maybe upload a video in the next days.
For connecting everything you need the two sensors, jumper wires, 2 times a 1k Ohm resistance, a breadboard.
-
-
Allo ? ? :p no answer ? :(
