I need help!!!!

tbbear

@danwitz65 ok, lets fix it step by step:

Rotate the screen (works for all normal displays, not for pi special and touchscreens)

Open a terminal and login to your pi

sudo nano /boot/config.txt
move all the way down to the end of the file
add the line: display_rotate=3
Press ctrl + o to save and ctrl + x to exit the file

Now do a reboot and you should have a screen tilted by the number of your desire:

0 = 0 degrees (the default value)
1 = 90 degrees
2 = 180 degrees
3 = 270 degrees

That’s it! Quick and easy.

danwitz65

@tbbear said in I need help!!!!:

@danwitz65 ok, lets fix it step by step:

Rotate the screen (works for all normal displays, not for pi special and touchscreens)

Open a terminal and login to your pi

sudo nano /boot/config.txt
move all the way down to the end of the file
add the line: display_rotate=3
Press ctrl + o to save and ctrl + x to exit the file

Now do a reboot and you should have a screen tilted by the number of your desire:

0 = 0 degrees (the default value)
1 = 90 degrees
2 = 180 degrees
3 = 270 degrees

That’s it! Quick and easy.

Oh hell thats gotta be my problem there i didnt realize save was ctrl+o i was kust doing x i think. Ill report back once i try it thanks a ton!

danwitz65

Ok sweet got it! Thank you!!

danwitz65

Oh my god worse problems now…

Id tryed editing my wifi auto turn off thing and followed a thing on line that said to delete the contents and type in what they had and now i dont have any internet at all and dont have my original file… do you have the original networks interfaces file…

danwitz65

Never mind fixed it.

Anyways where im at now is trying to get it to auto start when the the powers on ive got pm2 ive tryed making the mm.sh file but that isnt working can i get a hand from the beginning of that process getting it to auto start.

Mykle1

@danwitz65

https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror

danwitz65

I dont understand this command and section

Whats a shell script

cd ~
nano mm.sh

Where do you put it how do you get it to work

And then id like to set my weather in adams wisconsin how do i do that i got my key or whatever and put it in so it shows up on the mirror but it says new york and i tryed just typing in adams and madison wi and it wouldnt switch over

Again thank you for all your help

Mykle1

@danwitz65 said in I need help!!!!:

And then id like to set my weather in adams wisconsin how do i do that i got my key or whatever and put it in so it shows up on the mirror but it says new york and i tryed just typing in adams and madison wi and it wouldnt switch over

I think the default locationID: "5128581", is for New York. You would have to change that to locationID: "5243553", in your config entry. The readMe file for weather tells you to get it at http://openweathermap.org/help/city_list.txt. I looked it up for you, based on Adams, WI.

Otherwise, you could put Adams,WI in location (no space) and locationID: "5243553",

danwitz65

Oh my god thank you so much!

Whil i got you hear can you help me through getting magic mirror to boot up automatically. Ive tryed and made the shell script i can run all the commands to get it to run then i try pm2 save and the sudo reboot.

The mirror loading screen shows up then goes blank and boots back up to raspbian desktop… its driving me nuts

Mykle1

@danwitz65

Perhaps you’re not saving the PM2 state correctly. I would only tell you exactly what is written here.

https://github.com/MichMich/MagicMirror/wiki/Auto-Starting-MagicMirror