MMM-Navigate, Navigation inside MagicMirror with Rotary Encoder

[AxLed]

@keineAhnung123 ,

thanks for your patience.
to first:
it seems to be something with the pullup / pulldown resistors, see also https://github.com/fivdi/onoff#configuring-pullup-and-pulldown-resistors
See also the new “gpio” config command (https://www.raspberrypi.org/forums/viewtopic.php?f=117&t=208748)
So here is another idea, can you try (based on informations mentione above):

• (i suppose your SW pin is 16)
• add following line in /boot/config.txt
  gpio=16=ip,pu
  Meaning: sets your GPIO 16 as input (ip) and pull up (pu)
• if this doesnt work try:
  gpio=16=ip,pd
  Meaning: sets your GPIO 16 as input (ip) and pull down (pd)

Maybe this way MMM-Navigate works without the python script.

To SW.watch you mentioned, this is ok, as i dont need to know the initial state of SW.

to third:

• i added the line in node_helper.js in the github repo.

Regards

AxLED

[keineAhnung123]

@AxLed Now it works with gpio=16=ip,pu
Do the changes in boot.txt affect the Raspberry Pi in any way i have to know?

Thanks a lot so far :)

[AxLed]

@keineAhnung123,

great to hear it works, i will update the readme at github.
The line in config.txt only tells the pi at boottime, that GPIO16 is set to input and the internal resistor is set to pullup. So there is nothing else to know unless you change your GPIO Pins for something else.
@Eisblume maybe this is a solution for your issue.

AxLED

[robiv8]

@AxLed
also a great modul from you :-)

I have tested and works fine. Two questions.

When I press any selection, the module disappears.
It fades out and the module below it jumps up. Why?

Is it possible to control the MMM-Dreambox module with it? That would be great, of course.

Thanks in advance

[AxLed]

@robiv8

the modul MMM-Navigate disappears by design. If it is faded out and you use rotary or button it comes back on (fades in).

Yes MMM-Dreambox can be controlled bei MMM-Navigate, see https://github.com/Ax-LED/MMM-Dreambox#further-options

AxLED

[robiv8]

@AxLed
Hallo,
is there a way to deaktivate this Fade out? i want it olways on.
Thanks Robi

OK Sorry, i found it by my self :-)
in MMM-Navigate.js
// this.hide(10000);