MMM-SleepWake using external motion detection source

[mithatcak]

@sdetweil I noticed a weird issue. sometimes after several sleep&wake cycles, when it goes to sleep only the stock currentweather and weatherforecast modules stays on. there is no error in the motion.log or MM log.

here is my config, I was using delay: 5 then switched to 0.2 so I can repeat the issue faster.

{
			module: "MMM-SleepWake",
			config:{
				delay:  0.2,               // default
				source: "external",
				mode:  "HIDE"
			}
			 // detectionDir: folder containing externally generated file when motion starts
			 //               will be created if needed
			 // detectionFile:  filename generated for motion start. default = 'detected'
},

[sdetweil]

@mithatcak very interesting… I use those default modules too and I have never seen that behavior.
like they didn’t handle the suspend request…

i have 4 systems running this everyday for months… only see the updatenotification module output on one as it doesn’t handle hide/suspend…

i will do some additional debugging

[sdetweil]

@mithatcak could you try something for me

i cannot reproduce this on any of my systems…

edit the MMM-SleepWake.js file

		case "SLEEP_HIDE":
			MM.getModules().enumerate((module) => {
				// if the module is already hidden
				if(module.hidden==true)
					// save it for wake up
					{v_self1.previously_hidden.push(module.identifier);}
				else
					// hide this module
					{module.hide(1000);}   // < --- change this line , remove the 1000 
```
should look like this
```
		case "SLEEP_HIDE":
			MM.getModules().enumerate((module) => {
				// if the module is already hidden
				if(module.hidden==true)
					// save it for wake up
					{v_self1.previously_hidden.push(module.identifier);}
				else
					// hide this module
					{module.hide();}
```

let me know

[mithatcak]

@sdetweil Unfortunately same result :/ I will try to replace currentweather and weatherforecast with weather module and see if it’s going to make any difference.

[mithatcak]

@sdetweil Good news, switching to new weather module fixed the issue.

[sdetweil]

@mithatcak interesting