MMM-DHT-Sensor

yawns

@steff92 said in MMM-DHT-Sensor:

@yawns same problem, nothing else than a black screen

But you did run npm install in ~/MagicMirror/modules/MMM-DHT-Sensor ?

STEFF92

@binia doesn’t work

STEFF92

@yawns yes i did

sdetweil

cut and paste your entire config, and paste into jslint.com,
at the bottom of the screen check

node.js, long lines, single quotes, and whitespace mess

may have to comment out a few trailing commas…

should find the problem, if its config text related…

otherwise

start the mm from the commandline on the pi and see what the error reports,

sdetweil

jslint suggests removing the extra trailing commas

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert"
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "Castrop-Rauxel",
				locationID: "",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "447e7403ed196c5dcfc895a3b85dd6b4"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Wettervorhersage",
			config: {
				location: "Castrop-Rauxel",
				locationID: "",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "447e7403ed196c5dcfc895a3b85dd6b4"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "Tagesschau",
						url: "http://www.tagesschau.de/xml/rss2"
					},
					{
						title: "BILD News",
						url: "https://www.bild.de/rss-feeds/rss-16725492,feed=news.bild.html"
					},
					{
						title: "Kicker News",
						url: "http://rss.kicker.de/news/aktuell"
					},
					{
						title: "Kicker BVB",
						url: "http://rss.kicker.de/team/borussiadortmund"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
                      module: 'MMM-soccer',
                      position: 'bottom_left',
                      config: {
                              api_key: 'c7c930952f7a4d73951b33b2386d30c1',
                              colored: false,
                              show: 'GERMANY',
                              leagues: {"GERMANY":430}
                              }
                },
		{
			module: "MMM-DHT-Sensor",
			position: "bottom_right",
			config: {
				sensorTyp: "11",
				sensorPIN: "7",
				updateInterval: "2000 ms",
				animationSpeed: "0",
				titleText: "Raumtemperatur",
				units: "metric"
			}
		}
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

STEFF92

@sdetweil i tried that code, but it doesnt work. Still the same problem.
I always start the MM in the command line with:

cd MagicMirror/
npm start

Then the black screen opens and i can’t see whats in the command line because if i want to stop MM i have to reboot the pi (I’m a total beginner, sorry, maybe there is an other possibility to stop without reboot).

I despair :loudly_crying_face:

sdetweil

@steff92 if u have a keyboard press ctrl-shift-i ( letter i) to open debug console.

Or start mirror in Dev mode, not full screen

npm start Dev

Alt-tab will also walk u between the available windows

cyberdie

This is my running config for this module:

		{
			module: "MMM-DHT-Sensor",
			position: "top_right",
			header: "Header",
			config: {
				sensorPin: 2,
				sensorType: 11,	
				updateInterval: 60 * 60 * 1000,
				initialLoadDelay: 0,
				animationSpeed: 1000,
				units: "metric",
				relativeScale: 35,
				debug: false
			}
		},