@Jalibu Danke für die Updates. Funktioniert bei mir auch.
Read the statement by Michael Teeuw here.
Latest posts made by bill22
-
RE: MMM-NINA
@Jalibu
Danke für das Update.
Ich kann bestätigen das das Filtern (exclude) funktioniert. Meldung erscheint dann nicht mehr.
Thanks for the update. I can confirm that the filter (exclude) is working for me.Das Downgrade der Warnstufe scheint aber immer zu erfolgen. Auswahl funktioniert nicht.
Downgrade of Warning is applied always. Selection true false does not work.downgradeLhpServerity müsste aber ohne das r sein = downgradeLhpSeverity. Vielleicht deshalb.
Maybe because of typo “r” in Severity.@requiemmg
Exclude:
Nach ändern in Großschreibung “LHP” und Neustart ging es bei mir.
After changing to capital “LHP” and restart, it worked for me. -
RE: MMM-NINA
Den Versender zu filtern wäre schon mal eine Möglichkeit.
Alternativ:
Hochwasserinformation als (Vor)-Info sehen, bei Gefahr folgt wohl eh eine separate Gefahren-Meldung.
Zumindest scheint es beim aktuellen ags 065350015015 Beispiel so.Falls dem so ist, könnte man als wählbare Option alle (“Severe”) Meldungen, sofern sie vom LHP kommen, vor Ausgabe in “Minor” konvertieren um normal anzuzeigen.
"headline": "Hochwasserinformation Rheinland-Pfalz", "provider": "LHP", "severity": "Severe", //>>wird automatisch in "Minor" gewandelt
–
Noch ein anderer Punkt. Siehst Du eine Möglichkeit den Corona Warn Status mit entsprechender aktueller Übersicht und Zusammenfassung anzuzeigen?
Link zum Beispiel auf BBK Seite
Geht ja auch per iFrame, schicker wäre es natürlich direkt im Modul…
-
RE: MMM-NINA
@jalibu alles klar, dann bin ich nicht alleine :-) Danke.
Vielleicht kann man das über das Filtern der verschiedenen BBK Warnstufen abfangen.
(Auf der Seite findet sich auch ein Bezug auf die entsprechenden DWD Stufen)
Hochwasserinformationen sollten demnach separat sein.
-
RE: MMM-NINA
Hi @jalibu,
Thank you for this very useful module!
I am using v1.3.0 and found that “Warnstufe: Hochwasserinformation” (normally yellow in NINA App) will also be displayed in red, same as severe level “Gefahr”.
Not sure if this can be filtered differently, I tried to play around with the CSS file but had no luck.You may check this actually with referring to:
ags: “065350015015” with both active notifications- “Gefahr” (red)(Jan 4)
- “Hochwasserinformation” (yellow)
-
RE: Control MMM-Podcast2 with MMM-KeyBindings / MMM-Remote-Control
Hi guys,
would like to check again if anybody can help on my described topic to trigger the MMM-Podcast2 with the Fire TV Remote?Best regards
Bill -
Control MMM-Podcast2 with MMM-KeyBindings / MMM-Remote-Control
Hey there,
wonder if anybody can help me on the following topic:I am running MM 2.10 on a Raspberry Pi 3B+ with various modules updated to the last versions.
So far all good but struggling with the connection between those three modules:- MMM-Podcast2
- MMM-Remote-Control
- MMM-KeyBindings
My objective is to start the Podcast with the Amazon Fire TV Remote.
At the moment i can start/stop the MMM-Podcast2 by sending a command from a browser:
(Same works with the other controls options for MMM-Remote-Control (Reboot, Shutdown, Toggle Full Screen,…) either with the command line ior the menu displayed by MMM-Remote-Control in a browser )
Start Podcast:
192.168.xxx.xxx:xxxx/remote?action=NOTIFICATION¬ification=BUTTON_PRESSED
So far i have connected the Fire TV Remote to the Raspberry and it shows “connected” within the Bluetooth Menu on the Desktop.
Checking in Terminal with:
ls /dev/input/
shows:
event0 micecat /proc/bus/input/devices | grep "Name"
says:
“Amazon Fire TV Remote Keyboard"Therefore i haven’t changed anything in the 99-btremote.rules file of the MMM.KeyBindings module:
SUBSYSTEM=="input", ATTRS{name}=="Amazon Fire TV Remote", ENV{DEVNAME}=="*event*", SYMLINK+="input/btremote"
i can see also the activity from the Fire TV remote while testing in terminal with
evtest
I have tried several configs but i was unable to locate the correct settings in the config to execute the Podcast trigger.
As far as i understood, the standard KeyBinding entry should just like this in the MM config to use the Fire TV Remote:
{ module: 'MMM-KeyBindings', config: { } },
In addition there should be an additional KeyBinding entry inside the config part of the MMM-RemoteControl, right?
(As the notification server function has been discontinued inside the KeyBinding part and it is recommended to do that via MMM-Remote-Control…)I have checked the forum discussions and found plenty on information how to link an external keyboard as well as switching screen on/off but no direct discussion about the Fire TV remote to trigger something like the podcast via MMM-Remote-Control module.
Maybe i missed something here but appreciated if someone can point out the right approach/what to add in the config to make it work.
Bill
-
RE: [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras
Hi and sorry for the late response.
Sounds pretty good and promising!
How do you “rotate” your SAT channels? Does it change based on time (after x seconds)?
For me it could be good enough to have a few channels to change, of course better to select from a small list. -
RE: [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras
if we could find one, it could be probably used to start/stop the stream. On the other hand it could be an option to define several “stand alone streams” and call those individually. Position of the streams could be even offset to each other…Just a thought…