It you get a nice Tv a remote may helpful and if it’s used as photo frame roll over magic mirror and it may have two HDMI socket it can be used a second screen for pc and its cheaper. Most monitors only have one Hdmi in low cost range . If their used as mirror in my opinion if you can get laptop screen with a drive board its best as its so slim . Monitors are slimmer then tv’s but can cost more ,pictures quietly is not an issue a you most seeing the mirror.
Deciding what best depends on your pocket if you go with glass it’s much better than film the cost between acylic or glass is about 25 pound more if you look around . It’s more about weight it can get very heavy.

Best thing to is it up a Tv you have and get it all working with add-on modules on the same size your going to use
Before deciding.

Hope my opinion has been helpful

Re: Looking for a submodule to update when the next bus is coming

I can get magicmirror pages to turn page 1 to 2 but if I try to go to page 3 it chashing the hole system .
Any new ways update my pages to turn overs?
Like, go to page 3

Thanks for any help

@sdetweil
H I’ve tried to add terminal file code on screen something about a drive not loading I’ve tried to post but I think it’s got rejected.
I’ll try again tomorrow if it not uploaded.

@sdetweil I have put on pm2 yet so run it with npm start
Every time if works until I add the Alexa Control is in the programe
It comes up something drive not load stwet . I’ll have run it again and get back to you what error says.

Re: Alexa control
Hi I have installed Alexa Control but if run the code
With code add into configuration file.
It will not run Magicmirror2
If I remove the code from the configuration it runs
Magicmirror?

Any help with get Alexa control work please.

Hi when run magicmirror npm start
With the Alexa control in my configuration file
In the Terminal in say load up like drive sewt something like .
And magicmirror 2 freeze up and will no run .

I had removed the module

And larst bracket [
As instructions you sent me

Any help getting my Alexa control to work?

Or we try get GoogleAssistant to change my pages
My EXT PAGES: is working in timed CAROUSEL is working
My GoogleAssistant recipes folder
With pages changing code has problem .
It starts up fine
If I ask it to . go to page 2 it works.
But if ask it to go to page 3 it all freezes up totally locked I have do hard reboot.

Any help in this problem?
Thanks James videogame95

@sdetweil
I tried to reply to but couldn’t find the post I removed the parts you said to remove
The configuration come no driver sewt something like that and doesn’t run.
I try up load my configuration.

@sdetweil I
Thanks your great
I had to do this with one of other modules
It’s not always staight forward
I’ll give it ago once again thanks

New subject my EXT-pages works fine on the timed rotation
If add recipes in GoogleAssistant [“test.js]”,

This from my GoogleAssistant recipes folder
Recipes
My configuration
I’ll put up later as not on my pi

What happens in sort of works I say go to page 2
It go to page 2
But when say go to page 3 in freezes up no voice controll on mouse control is totally,
Lock up.

Any help with my recipes with 3 page on magicmirror2

Where can get the install code for Alexa echo dot or Alexa control?

Re: Alexa echo dot
Hi I add the code from Alexa controlled to my configuration file .js
And it stopped it working I didn’t change anything except add a , on the of the},
When I removed the script it worked ? What am doing wrong I past in wrong do ?I need add all code in module for it to work ? Or just first js and just the second js file or could it be the way its pasted in to js. Config . I always line up the first brake and larst bracket with overhead brackets ? And add , to last }, like this .

Thanks for any help