@sdetweil

sent…

@sdetweil

My calendar also stopped showing events (from my Google calendar).

Running

bash -c  "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)" force

fixed it for me. It worked like ‘Magic’ - pun intended.

Thank you!!

@sdetweil

That did it - changed the address to 0.0.0.0 and used “http://192.168.50.177:8080/configure”.

Awesome!

Thank you!!

@sdetweil

I’ve tried to get it to work from my desktop, but no joy.

This is the code at the top of my config.js file:

/* Config Sample
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/configuration/introduction.html
 * and https://docs.magicmirror.builders/modules/configuration.html
 *
 * You can use environment variables using a `config.js.template` file instead of `config.js`
 * which will be converted to `config.js` while starting. For more information
 * see https://docs.magicmirror.builders/configuration/introduction.html#enviromnent-variables
 */
let config = {
	address: "localhost",	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/",	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
									// you must set the sub path here. basePath must end with a /
	ipWhitelist: [],	// Set [] to allow all IP addresses
									// or add a specific IPv4 of 192.168.1.5 :
									// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
									// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
									// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false,			// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "",	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "",	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",   // this variable is provided as a consistent location
			   // it is currently only used by 3rd party modules. no MagicMirror code uses this value
			   // as we have no usage, we  have no constraints on what this field holds
			   // see https://en.wikipedia.org/wiki/Locale_(computer_software) for the possibilities

	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",

	modules: [

This what I’ve tried entering in Firefox on my desktop:

http://192.168.50.177:8080/configure
http://192.168.50.177:9000/configure
0.0.0.0
0.0.0.0/configure

When using 0.0.0.0, I notice the address changes to “https://127.0.0.1/configure”.

In all cases, I get “Unable to Connect”.

Here’s the code for the MMM-Config in my config.js file:

{
		module:"MMM-Config",
		position:"top_right", 
			// the QR code (if requested) will appear here
		config:{
                      		}
	},

Thank you for hanging in there with me on this. It works fine when I plug a mouse and keyboard into the RPi, by the way.

@sdetweil

I’ve installed it - works great!

The only thing I can’t figure out is how to access it from my desktop. I run MM on an RPi.

I’ve tried to change the address in the Basic section, but no joy.

@sdetweil

I’ll definitely try that - Thanks again.

@sdetweil

imperial (units) worked, but you knew it would :)

Thank you!!

I know this must be a basic question, but I simply cannot find a way to change the reported temperature to Fahrenheit.

@barnosch

Thank you for this!

I’ve added it to my Mirror - works great! I will likely convert the language shown on my screen to English…