@sdetweil Ok, thanks. Just curious.

@sdetweil MMM-Remote-Control, that allows you to display or hide modules?

@ccr41981 said in MMM-CalendarExt2:

@sdetweil

@sdetweil One last question; would you know why CalendarExt2 doesn’t show up on the remote module? Not that I’d ever turn it off, just curious.

@sdetweil said in MMM-CalendarExt2:

@ccr41981 you’ve read the config doc?

https://github.com/MMM-CalendarExt2/MMM-CalendarExt2/blob/master/docs/Configuration.md

use the example, and your url .

also, this module suffers from a missing library ( that was removed from the base a couple releases back )

in the module folder (MagicMirror/modules/MMM-CalendarExt2) do

npm install request --save

Works great now! Thanks for your help

@sdetweil Gotcha! Thanks again

@sdetweil I’ve been through those posts about the display error, but i will go back and try to troubleshoot again.

However, the calendar did just pop up, so now I can go tinker with the look and set up my interface. Thanks for your help.

@ccr41981 said in MMM-CalendarExt2:

@sdetweil Yikes, ok, I’ll figure out what all that means.

I’ve only been running it in server mode, since I haven’t been able to resolve the Display error to make it run as it’s own instance. I’ll try and resolve that and do these steps.

AS YOU WERE. For some unknown reason, the calendar just popped up

@sdetweil Yikes, ok, I’ll figure out what all that means.

I’ve only been running it in server mode, since I haven’t been able to resolve the Display error to make it run as it’s own instance. I’ll try and resolve that and do these steps.

@ccr41981 said in MMM-CalendarExt2:

@sdetweil I DID use that example, but I did not know about the missing library. I will run that and let you know.

Thank you for taking the time.

Ugh, still nothing.

Out of curiosity, are there any resolution constraints? Or are there any problems with running this on something other than a raspberry pi? I am running MagicMirror2 on my Windows 10 machine, just to play around with the settings while I wait on my pi.

@sdetweil I DID use that example, but I did not know about the missing library. I will run that and let you know.

Thank you for taking the time.

@sdetweil Very well. So, how does one set this up? I installed the module, but it doesn’t show up at all. I’ve put in my ics links in the calendar spots, but nothing. I’ve gleaned that there is something to be done with custom css, but I haven’t been able to figure it out. Can someone break down what needs to be done just get a visual going?

@sdetweil understood, I got that from the thread. Was just hoping there was some other documentation than the main GitHub page. I don’t want to ask a bunch of annoying questions, but I could use some help.

I don’t suppose there’s a dummies guide to make this work?