Posts made by DigiDadbod

@oberfragger nice. So can you read everything when it gets fogged up?

@nneuland just want to let you know; depending on how good your router is, you should be able to get it set up on a separate IOT network if desired. I forget exactly how I set mine up but it was either by allowing specific IP addresses to talk to each other one way, or a combo of that and enebling mDNS of some sorts (which is something I think you have to enable for things like Google speaker on an adjacent local network). Obviously, you will find better info on a forum dedicated to your router…

@Serge

Thank you for the response. I guess I am missing where the config.js controls that. Is there a setting/command for that? My experience thus far: so if I save what modules I want on/off from the RC menu and then save/restart from the RC it remembers all excecpt one module in particular : MMM-RandomPhoto.

Action/description I refer to on RC:

SAVE: Save the current configuration (show and hide status of modules, and brightness), will be applied after the mirror starts

So I have the Remote-Control module up and running. Everything seems to be working with one exception:
the modules I have saved in the menu to be on/off is not remembered on startup. The only thing I can think of is that I installed one module after the remote was prev installed (module page has a disclaimer about doing so). It talks about indecies getting messed up but I’m not sure what we are referring to here. Anyone have an idea?