Posts made by Eisblume

Eisblume

It would be nice if someone implemented the Rain-Radar from WetterOnline.de ;-)

Eisblume

@AxLed said in MMM-Navigate, Navigation inside MagicMirror with Rotary Encoder:

{notification:‘BUTTON_PRESSED’,payload:‘’},

Thanks. Works perfect !!!

Eisblume

@AxLed
Yes very interesting experiences :-) !

Could you explain my how to start “Tagesschau in 100 Sekunden” in MMM-Navigate ??

Eisblume

@AxLed
Ok, i fix it now for me.

I know, it is a dirty code, but don’t found another solution :dizzy_face:

I attached the KY040 python script in the node_helper.js. Then everything works fine.

//node_helper.js
/* Magic Mirror
 * Node Helper: {MMM-Navigate}
 *
 * By {AxLED}
 * {MIT} Licensed.
 */

 //Debugging
 //tail -f ~/.pm2/logs/mm-out-0.log
 //tail -f ~/.pm2/logs/mm-error-0.log 

const Gpio = require('onoff').Gpio;
...
const spawn = require("child_process").spawn;
//Variables
...
  start: function() {
		var self = this;
		this.loaded = false;
		var process = spawn("python", ["/home/pi/Downloads/KY040/examples/python3.py"]);
	},
	
...
});

Eisblume

@AxLed
Do not think that I am lying ;-), but it works fine, when I start MagicMirror and after that I start the python - script from here https://github.com/martinohanlon/KY040.

cw, cww and press works absolutely fine.

It is very strange.

Eisblume

@AxLed
Also after clean install with nothing more, the default modules and MMM-Navigate and MMM-Remote-Controll it doesn’t work.

Here you can see: https://youtu.be/G2eRoPxRPjU

Only when I remove ground, the press action works. But then, the cw and cww doesn’t work…

Eisblume

Thank you so much for your help. But It still doesn’t work.

The cabeling is correct I checked it many times ;-)

The crazy thing is, when I remove ground, the press button works, but not the cw and cww.

I think, I will try a clean reinstall on my RPi3.

Eisblume

Ok, thanks @AxLed !!

config.js:

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "0.0.0.0", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.1/120", "192.168.1.1/24"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "de",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "MMM-Navigate",
			header: "Navigation",
			position: "top_left",
			config: {
					Alias: [
						'Seiten blättern',
						'News (mehr/weniger Details)',
						'Test notification',
						'News - mehr Details',
						'News - weniger Details',
						'Neustart MagicMirror (PM2)',
						'Neustart',
						'Herunterfahren'
					],
					Action: [
						[{notification:'PAGE_INCREMENT',payload:''},{notification:'PAGE_DECREMENT',payload:''}],//action array, first press locks menu, after this rotation CW/CCW executes, second press release lock mode
						[{notification:'ARTICLE_MORE_DETAILS',payload:''},{notification:'ARTICLE_LESS_DETAILS',payload:''}],
						{notification: "SHOW_ALERT", payload: {type:"notification",message:"Dies ist eine Testnachricht"}},//single action, execute on press
						{notification:'ARTICLE_MORE_DETAILS',payload:''},
						{notification:'ARTICLE_LESS_DETAILS',payload:''},
						{notification: "REMOTE_ACTION", payload: {action: "RESTART"}},
						{notification: "REMOTE_ACTION", payload: {action: "REBOOT"}},
						{notification: "REMOTE_ACTION", payload: {action: "SHUTDOWN"}}
					],
					GPIOPins: [26,20,19]//rotary cw, rotary ccw, rotary press (BCM Numbering)
					},
},
		{
    		module: 'MMM-Remote-Control',
    		// uncomment the following line to show the URL of the remote control on the mirror
    		// , position: 'bottom_left'
    		// you can hide this module afterwards from the remote control itself
    		config: {
        		customCommand: {},  // Optional, See "Using Custom Commands" below
        		customMenu: "custom_menu.json", // Optional, See "Custom Menu Items" below
        		showModuleApiMenu: true, // Optional, Enable the Module Controls menu
        		apiKey: ""         // Optional, See API/README.md for details
    		}
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "calendar",
			header: "Familie Reetz",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://pxxxxxxm/xxxxxxxKSw_tdQ8WGeTZVjgr6Vwn1HDxxxxxxx5OuupPnKOIExxxx"
					}
				]
			}
		},
//		{
//			module: "compliments",
//			position: "lower_third"
//		},
{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "xxxx",
				locationID: "xxx",  //ID from http://bulk.openweathermap.org/sample/; unzip the gz file and find your city
				appid: "xxxxx"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Wettervorhersage",
			config: {
				location: "xxxx",
				locationID: "xxxx",  //ID from https://openweathermap.org/city
				appid: "xxxxx"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "Tagesschau",
						url: "http://www.tagesschau.de/xml/rss2"
						//url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
    		module: "MMM-Fuel",
    		position: "bottom_left",
    		config: {
        			api_key: "xxxxx",
        			lat: 123456,
        			lng: 654321,
        			types: ["diesel"],
        			radius: 15,
        			max: 3     			
    				}
		},
		{
	        module: 'MMM-Dreambox',
			header: 'Vu+ Ultimo4K powered by VTi',
			position: 'bottom_right',
			config: {
				apiBase: 'http://192.168.1.50:90',
				//omxargs: ' --vol -6000 --win 0,625,590,957 --live ',
				omxargs: ' --win 600,60,1490,940 -o both ',
				refreshInterval: 1000 * 30, //refresh every 30 seconds
				apibouquet: 0, //bouquet, if there is more than one under apiservices (/web/getallservices),
				apiRecordingsID: 0, //which recording folder should be listed
				listmax: 10,
				apiabout: '/web/about',
				apiservices: '/web/getallservices',
				apiepgnow: '/web/epgnow?bRef=',
				apizap: '/web/zap?sRef=',
				apiTimerlist: '/web/timerlist',
				apiServicelistplayable: '/web/servicelistplayable?sRef=',
				apiLocations: '/web/getlocations', //where are the recording folders listed
				apiMovielist: '/web/movielist?dirname=' //link for opening recording folder and list recordings
				}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Eisblume

@AxLed
I tried every very with different press speed. It doesn’t work. No press Signal will be sent :-(

I don´t understand why cw and cww works fine, but not the press - Button?

Edit:
I test the Rotary with this: https://github.com/martinohanlon/KY040
Here the press button works fine.

pi@raspberrypi:~/EncoderTest/KY040/examples $ python python3.py
turned - 0
turned - 0
turned - 1
turned - 1
button pressed
button pressed
button pressed
button pressed
button pressed
button pressed

Eisblume

@AxLed
I use a Raspberry Pi 3 b+. The F2F cables between the rotary and the pi are 20cm long.
I tried different speeds for pressing and releasing.

When i debug the code, no action arrives when i press the button.

Is it possible that there are problem with other modules I use ??

Eisblume