Finally I can also show the mirror I ordered by Denis.

First Denis is an absolute nice person and really cares that you will receive your mirror in one piece!

I ordered a 120x70 cm Mirror that will serve in the bathroom with cutouts for makeup Illumination, a camera hole and of course a cutout for the Info display.

The mirror was really well protected and shipped via dpd with tracking number.

I glued a welded alu frame on the back that consists of 3x2cm L profiles, the 3cm side is glued on the pre applied foil.

The hardware is a rpi 4 with 2Gb and a rpi 2.1 cam and a old Laptop display.
Pi and display are powered with one 48V Poe to 12V 1A adapter and one 48V Poe to 5V 2,4A Adapter.

The Make-up light is made of a 24V powered ultra bright 6000K neutral white led strip.

Greetz
Eldrik

@ivanov_d ok thx, I will create a drawing and send you a pm.

Finally I can also show the mirror I ordered by Denis.

First Denis is an absolute nice person and really cares that you will receive your mirror in one piece!

I ordered a 120x70 cm Mirror that will serve in the bathroom with cutouts for makeup Illumination, a camera hole and of course a cutout for the Info display.

The mirror was really well protected and shipped via dpd with tracking number.

I glued a welded alu frame on the back that consists of 3x2cm L profiles, the 3cm side is glued on the pre applied foil.

The hardware is a rpi 4 with 2Gb and a rpi 2.1 cam and a old Laptop display.
Pi and display are powered with one 48V Poe to 12V 1A adapter and one 48V Poe to 5V 2,4A Adapter.

The Make-up light is made of a 24V powered ultra bright 6000K neutral white led strip.

Greetz
Eldrik

@ivanov_d ok thx, I will create a drawing and send you a pm.

@ivanov_d count me in on one.

1,2m x 0,7m shipping to germany

On what basis do you need the input design for the laser cut foil?

Regards
Eldrik

@goldjunge_chriz

what about sandblasting the area? Is it possible for the material?

If illuminated from the back would it be enough to illuminate a person in the front?

Regards
Eldrik

@goldjunge_chriz

excuse me if this was already asked on one of the older order threads.

Is it possible to create areas for illumination like on this example mirror?

Example mirror

If not how much light would shine through the back if someone masks an area and put a strong led on the back? Are there any example pictures available?

Regards
Eldrik