Posts made by Feedy88

Feedy88

@majik655 I think the request was more about maintenance and configuration, so this would not help too much.

@tripalreno4 completely different Concept would be to not use this MM-Project but trying Mirr.os (https://glancr.de/mirr-os/). It is a full OS and provides a smart phone App to do the configuration on the mirror.

Cons:

only in German (afaik)
only Limited modules, not open source. Most common modules are supported though.

Feedy88

Guys, I would need some help with this module. I understood that currently the Trash-Icon is hard-coded in the module folder and embedded into the JS. I would like to know if it is possible to add a second (potentially third) icon which shall be used. Background: In my city we have Pickup always on the same Weekday, unless there is s a bank holiday. For this instances I would like to add a red exclamation mark to the pickup row. I can work with a red Trash Icon as a quick fix but would be great to find a neater solution.

Thanks in advance.

Feedy88

@Sezer84
Öffne deine garbage_shedule.csv und ersetze die Farben in der Kopfzeile, entweder durch andere Farben oder durch Hex-Codes. Für Gelb und Blau finde ich die Standardwerte gut, für Braun habe ich den code genommen: #663300. Orange nutze ich nicht, statt dessen Grau mit Codierung #7d7d7d.

Die Hex-Codes kannst du hier finden. Einfach ne Farbe aussuchen und den Wert mit der # Aufschreiben. Die CSV sollte am Ende dann so ähnlich aussehen:

WeekStarting,#7d7d7d,yellow,#663300,blue
07/20/20,1,1,0,0
07/27/20,0,0,1,1
08/03/20,1,1,0,0
…

VG

Feedy88

@jukums said in ZOOM /Scaling:

Ok, got same problem…
Connecting the keyboard and hitting Ctrl+0 to reset zoom seemed to work.
Seems that zoom value is being cached somewhere…

Thanks a lot for this. I am currently in setup, so I still have a Keyboard connected and this did the trick.

Feedy88

Hey guys,

I would like to set up MM on a Pi which simultaneously runs Pihole (DNS via WiFi, so LAN-Cable is not an issue) and Home Assistant with a ConBee II stick. Eventually I would like to get a CLU-Stick at some point to run additional automation and make my blinds smart.

As I currently do only have a borrowed pi from a friend which runs HomeBridge and Pihole, I will need to get a new Pi regardless. So the questions in charge are:

Does it make sense to run all on one or could the mirror glass block the ConBee and CLU sticks from properly sending?
If it makes sense, what Pi do you recommend?
If it does not make sense and I will only run MM on the Pi, which one should I get in this case?

Thanks and regards,
Feedy88