@klinge you are tying it to localhost only? If you do that, you can’t connect to it, it should be 0.0.0.0 or something like that?

No problem, a week more or less of the 9 months won’t change much :-)

I’ve set up the delay to 30000, so it should take it’s time between rolling the news.
It’s the original news module, with an added QR code module.
It fetches news from some RSS feeds.
I’ve tried rebooting the pi, and also just restarting MM.
It has about 12 GB available space, so that’s not the problem.
What on earth is suddenly going on? This has worked for at least a year?
Everything is fully updated on the modules and core.

@fribse Ok, so the black screen has nothing to do with the error:

0|MagicMirror  | [1554:0213/183501.650842:ERROR:viz_main_impl.cc(161)] Exiting GPU process due to errors during initialization
0|MagicMirror  | [1601:0213/183503.081619:ERROR:viz_main_impl.cc(161)] Exiting GPU process due to errors during initialization
0|MagicMirror  | [1621:0213/183503.548717:ERROR:sandbox_linux.cc(376)] InitializeSandbox() called with multiple threads in process gpu-process.

As that is still shown when I start the software…

Go to the community order on this page, the mirrrors he is offering is real mirrors, and the best I’ve found.

@Dermo134 If you need real glass, I would go with the community order on this site.

@cheapdad No, you are not mistaken, the material is rather expensive. The acryllic is the cheapest solution, but you will get artifacts. There is a community order active on the site, but that is for EU, and with prices in $ I guess that is not attractive for you :-)
I also use a PIR for waking it up, but I have a PIR for the light, and then the light wakes up the mirror via MQTT.