@costascontis ευχαριστώ! (αν θες κάτι στα ελληνικά, μίλα σε pm αλλιώς γράφω σε αγγλικά για τους κανόνες του φόρουμ)

I used a tinted glass called “SOL” that has a bronze tint and i think its ~80% reflective (and its very cheap).

For voice commands i used the google AIY Voice kit, you can run it even without the magic mirror app on any pi, and its “almost” ready for use.
The only downside is that I don’t have a screen output connected to my assistant, so it’s not like some modules here in the forum, but on the other hand, i did not want the google assistant to interfere with the magic mirror app.

What do you mean by “What do u use for voice commands?”
The input method is a mic, that came with the google voice kit, and all kinds of commands are accepted. (For example i have a sonoff relay controlling the power to the magic mirror monitor and i use the assistant to turn it on and off).

Hello fellow Magic Mirror builders, so after lots of trials and errors, I have finally finished my magic mirror!!! :smiling_face_with_open_mouth_smiling_eyes:
I´m using a 19" LG wide monitor, an RPI 3b+ and a google voice hat v1.

The cost of the whole build (including frame, glass and electronics) was a little less than 200€.

The following modules were used:

• Clock
• currentweather
• weatherforecast
• calendar_monthly
• MMM-MyCalendar
• MMM-Xiaomi
• MMM-Tools
• MMM-NetworkScanner
• MMM-GoogleBirthdaysProvider

P.S A BIG thank you :thumbs_up: to all the modules developers for their contribution in this project!!
Greeting from :greece:

Very nice build!!! i didn’t know you could add a second screen to the pi!!! How did you do it??

@cowboysdude thank you for your module, the ability to use the module with various providers is really something that makes a difference!

Would you consider adding a wind direction (icon or text) in a future update ?

Has anyone tried to get the module to work with a Gateway AND a Yeelight bed lamp ??

I mean i have the module working with my gateway (manually added the token, and then the sensors appeard in miio discovery) but i havent managed to get it to work with the yeelight lamp (that also acts as a bluetooth gateway for my other sensors).

When i reseted the lamp, and connected to its wifi, i discovered it with miio and extracted the token, but later when i registered the lamp with the mi app, and connected my pi to my wifi, while the lamp is pingable by the pi, now miio doesn’t discover it!!

But, besides that, even if i manage to discover the lamp again with miio, i’m not aware if its even possible to add a second gateway to the module.

Does anyone know??