@michael24h check you have the folder for phone notifications named correctlry in modules folder. Balck screen happened a couple of times for me and this was the problem.

@hawkesley Hi,
I tested ipW [] and that worked for MMM-syslog.
I changed the ipW as suggested with “192.168.1.1/24” and that also works.
So, thanks very much both.
My remaining question is if I can send the message to MMM-syslog from outside my local network with this ipW?
I will try later today.

@yawns Thanks, will look at that.
In reply to strawberry I inserted this “::ffff:192.168.1.109”,
Access denied on CLI was 192.168.1.109

@hawkesley
Trying MMM-syslog but cant get access.
This device is not allowed to access your mirror.
Please check your config.js or config.js.sample to change this.
I modified the whitelist as follows :e-mail:

port: 8080,
	ipWhitelist: ["::fff:0.0.0.0/1", "::fff:128.0.0.0/2", "::fff:192.0.0.0/3", "::fff:224.0.0.0/4", "127.0.0.1", "::ffff:192.168.1.1/24", "::ffff:192.168.1.109","::ffff:127.0.0.1", "::1"],

The http is : http://192.168.1.112:8080/syslog?type=normal&message=Test Message
Any thoughts appreciated.

Thanks will try both.

@broberg Ok. Will do if pushB is available for iphone.
Also just discovered MM-syslog which looks promising if it can use an http get i guess?

@broberg Thanks for that. I did see the module, but as I understand it this will just notify that there is a message , rather than display it?
The intended use I have is to display the message because the viewer may not be able to use a mobile phone.
I can send the message to my website and maybe forward it to the mirror from there perhaps using the wordpress api. This is much more complicated though.

Hi, New to this forum so a general question.
I would like to show SMS messages on my mirror, fed from my local server. My server is apache, php & wordpress. The functionality works fine but for some messages I would like to forward the SMS and display on the mirror.
Is this possible and if so how to approach it?
I have looked at MM-iFrame but cannot get that to work.
Any suggestions welcome.