I have also tried to find out the actual resolution with & /opt/vc/bin/tvservice -s aand that’s 1920x1080. Maybe any chance to tell the pi to somehow reset the input of the hdmi port?
A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
I
Posts made by iamthat79
-
RE: New screen after configuring MM --> can't see edgesposted in Troubleshooting
-
RE: New screen after configuring MM --> can't see edgesposted in Troubleshooting
I have already tried to do that. Here are the lines of my config.txt for that purpose. Any mistakes in there?
hdmi_force_hotplug=1
hdmi_group=2
hdmi_group=86
display_rotate=3 -
New screen after configuring MM --> can't see edgesposted in Troubleshooting
Hi,
for installing and configuring my MM I used an old PC monitor. After that I plugged in my monitor for the mirror, rotated it and wanted to put it on the wall, but… now I have the problem that the edge on the bottom and on the right side is missing. So not everything that is in the mirror, is shown on the screen.
Any solutions for such a problem? I just don’t want to the complete installing again. :(
Thanks for any help. -
RE: MMM-Tankerkoenig can I show Diesel and E5 ? in one table??posted in Troubleshooting
Hi,
mine is working with: types: [diesel", “e5”] in the config-part of the MMM-Fuel module.