Posts made by Laurids

Laurids

@foxy25 Hi, after a new installation of MagicMirror I have problems with the callmonitor. The MM shows the number of incoming calls, but the list of missing calls is empty. When I set

showContactsStatus: true

,then I only get two rotating arrows behind “no calls”, instead of the number of entrys of my phonebook.
I tried all the advices in this thread, but nothing works. In another thread I found, that it would be helpful to uninstall Python and install version 0.5.0. Can someone explain, how to do this?
Thanks and best regards

Laurids

@sdetweil I really don´t know what was wrong. Now I´ve made a new installation, copied my old config.js and it works. Thanks for your help.

Laurids

@sdetweil thanks for your help. I have to admit, that I don´t have a clue how to fix the errors ;) I think I just give it another try with a new installation.

Laurids

@sdetweil here are some lines of the error.log. They repeat all the time:

[17:05:32.926] [ERROR]  error: cannot lock ref 'refs/tags/v2.12.0': unable to resolve reference 'refs/tags/v2.12.0':
Von https://github.com/MichMich/MagicMirror
 ! [neues Tag]         v2.12.0    -> v2.12.0  (kann lokale Referenz nicht aktualisieren)

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! magicmirror@2.10.1 start: `./run-start.sh`
npm ERR! Exit status 1
npm ERR!.
npm ERR! Failed at the magicmirror@2.10.1 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2021-05-08T15_37_28_171Z-debug.log
/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT
[08.05.2021 17:39.18.396] [WARN]  The module 'currentweather' is deprecated in favor of the 'weather'-module, please
[08.05.2021 17:39.18.402] [WARN]  The module 'weatherforecast' is deprecated in favor of the 'weather'-module, please[08.05.2021 17:40.30.779] [ERROR] Whoops! There was an uncaught exception...
[08.05.2021 17:40.30.812] [ERROR] Error: connect ECONNREFUSED 192.168.178.1:1012
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1141:16) {
  errno: 'ECONNREFUSED',
  code: 'ECONNREFUSED',
  syscall: 'connect',
  address: '192.168.178.1',
  port: 1012
}
[08.05.2021 17:40.30.816] [ERROR] MagicMirror will not quit, but it might be a good idea to check why this happened.
[08.05.2021 17:40.30.819] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://githu[08.05.2021 17:40.36.632] [ERROR] Failed to fetch git data for MMM-ioBroker: Error: block timeout reached
[08.05.2021 17:40.37.844] [ERROR] Failed to fetch git data for default: Error: block timeout reached
[08.05.2021 17:50.40.859] [ERROR] Failed to fetch git data for default: Error: block timeout reached
[08.05.2021 17:53.34.562] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[08.05.2021 17:53.34.564] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087

and

[09.05.2021 11:28.04.125] [ERROR] MagicMirror will not quit, but it might be a good idea to check why this happened.
[09.05.2021 11:28.04.126] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://githu[09.05.2021 11:28.04.676] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:28.04.679] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:28.04.681] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:28.04.683] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:28.04.686] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:28.04.691] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:28.06.421] [ERROR] Failed to fetch git data for MMM-FRITZ-Box-Callmonitor: Error: block timeout reache[09.05.2021 11:29.04.732] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:29.04.737] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:29.04.740] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:29.04.743] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:29.04.746] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:29.04.751] [ERROR] Got error: connect ECONNREFUSED 127.0.0.1:8087
[09.05.2021 11:29.30.532] [WARN]  The module 'currentweather' is deprecated in favor of the 'weather'-module, please
[09.05.2021 11:29.30.535] [WARN]  The module 'weatherforecast' is deprecated in favor of the 'weather'-module, please[09.05.2021 11:29.34.824] [ERROR] Whoops! There was an uncaught exception...
[09.05.2021 11:29.34.836] [ERROR] Error: connect ECONNREFUSED 192.168.178.1:1012
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1141:16) {
  errno: 'ECONNREFUSED',
  code: 'ECONNREFUSED',
  syscall: 'connect',
  address: '192.168.178.1',
  port: 1012

Laurids

@sdetweil I hope that this is helping

2021-05-08T17:37:34: PM2 log: PM2 successfully stopped
2021-05-08T17:38:09: PM2 log: ===============================================================================
2021-05-08T17:38:09: PM2 log: --- New PM2 Daemon started ----------------------------------------------------
2021-05-08T17:38:09: PM2 log: Time                 : Sat May 08 2021 17:38:09 GMT+0200 (GMT+02:00)
2021-05-08T17:38:09: PM2 log: PM2 version          : 4.2.3
2021-05-08T17:38:09: PM2 log: Node.js version      : 10.24.1
2021-05-08T17:38:09: PM2 log: Current arch         : arm
2021-05-08T17:38:09: PM2 log: PM2 home             : /home/pi/.pm2
2021-05-08T17:38:09: PM2 log: PM2 PID file         : /home/pi/.pm2/pm2.pid
2021-05-08T17:38:09: PM2 log: RPC socket file      : /home/pi/.pm2/rpc.sock
2021-05-08T17:38:09: PM2 log: BUS socket file      : /home/pi/.pm2/pub.sock
2021-05-08T17:38:09: PM2 log: Application log path : /home/pi/.pm2/logs
2021-05-08T17:38:09: PM2 log: Worker Interval      : 30000
2021-05-08T17:38:09: PM2 log: Process dump file    : /home/pi/.pm2/dump.pm2
2021-05-08T17:38:09: PM2 log: Concurrent actions   : 2
2021-05-08T17:38:09: PM2 log: SIGTERM timeout      : 1600
2021-05-08T17:38:09: PM2 log: ===============================================================================
2021-05-08T17:38:10: PM2 log: App [mm:0] starting in -fork mode-
2021-05-08T17:38:10: PM2 log: App [mm:0] online
2021-05-08T18:09:01: PM2 log: Stopping app:mm id:0
2021-05-08T18:09:03: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:03: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:03: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:04: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:05: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:05: PM2 log: pid=890 msg=failed to kill - retrying in 100ms
2021-05-08T18:09:05: PM2 log: Process with pid 890 still alive after 1600ms, sending it SIGKILL now...
2021-05-08T18:09:05: PM2 log: App [mm:0] exited with code [0] via signal [SIGKILL]
2021-05-08T18:09:06: PM2 log: pid=890 msg=process killed
2021-05-08T18:09:07: PM2 log: PM2 successfully stopped
2021-05-08T18:09:43: PM2 error: TypeError [ERR_INVALID_ARG_TYPE]: The "data" argument must be of type string or an in    at Object.writeFileSync (fs.js:1460:5)
    at module.exports.Daemon.innerStart (/usr/local/lib/node_modules/pm2/lib/Daemon.js:90:8)
    at Domain.<anonymous> (/usr/local/lib/node_modules/pm2/lib/Daemon.js:62:10)
    at Domain.run (domain.js:370:15)
    at module.exports.Daemon.start (/usr/local/lib/node_modules/pm2/lib/Daemon.js:61:5)
    at Object.<anonymous> (/usr/local/lib/node_modules/pm2/lib/Daemon.js:455:10)
    at Module._compile (internal/modules/cjs/loader.js:1063:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:1092:10)
    at Module.load (internal/modules/cjs/loader.js:928:32)
    at Function.Module._load (internal/modules/cjs/loader.js:769:14)
2021-05-08T18:09:43: PM2 log: ===============================================================================
2021-05-08T18:09:43: PM2 log: --- New PM2 Daemon started ----------------------------------------------------
2021-05-08T18:09:43: PM2 log: Time                 : Sat May 08 2021 18:09:43 GMT+0200 (Mitteleuropäische Sommerzeit)2021-05-08T18:09:43: PM2 log: PM2 version          : 4.2.3
2021-05-08T18:09:43: PM2 log: Node.js version      : 14.16.1
2021-05-08T18:09:43: PM2 log: Current arch         : arm
2021-05-08T18:09:43: PM2 log: PM2 home             : /home/pi/.pm2
2021-05-08T18:09:43: PM2 log: PM2 PID file         : /home/pi/.pm2/pm2.pid
2021-05-08T18:09:43: PM2 log: RPC socket file      : /home/pi/.pm2/rpc.sock
2021-05-08T18:09:43: PM2 log: BUS socket file      : /home/pi/.pm2/pub.sock
2021-05-08T18:09:43: PM2 log: Application log path : /home/pi/.pm2/logs

Laurids

@sdetweil thank you for your reply. I´m sorry for this stupid question, but how can i copy text out of a log-file, when I use ssh? My pm2.log has more than 10000 lines, which are important for you?

Laurids

Hello,
I have to admit, that I´m an absolute noob. I was able to run the MagicMirror on a raspi3 with different modules. Yesterday I installed some updates (MM and ioserver) and since then, I have the problem, that my MM stops after 78 seconds everytime after a restart. What did I do wrong?
Thanks for your help,
Laurids

Laurids

Hi all,
this is my first post, so please be patient with me ;)
I´m trying to use MMM-FRITZ-Box-Callmonitor, but I have some problems, although I followed nearly every hint in this discussion.

When someone is calling, I can see his number but not his name on the screen.
The latest calls only were shown when I don´t config password and username. Why is that?
when I test the connection with:

python fritz_access.py -p PASSWORD -u USER -i xxx.xxxx.xx.xx

I retrieve all the data from my Fritzbox, so the connection should not be the problem.

At least I tried the recommended fix of wunderbear, but after a reboot I only get a black screen (with the cursor top-left) after starting the MagicMirror. What is the reason and how can I solve these problems? I don´t want to start all other again :weary_face:

I hope, that someone can help me to fix my problems.

Thanks and regards
Laurids