Read the statement by Michael Teeuw here.
MMM-FRITZ-Box-Callmonitor
-
@paviro
i have the problem currently that
MMM-FRITZ-Box-Callmonitor is not working anymore.
So the overlay when someone calls is not showing anymore.The current call works without problems.
Nothing was changed. No idea what happened.
Fritzbox settings wasn’t changed nor a firmware upgrade was doneWhat do i need to check?
-
@rf0620 i have tried to install the module and i had unnbekannte fehler (unknown issue) error . i followd all the steps but i have another error now:
pi@raspberrypi:~ $ sudo pip install fritzconnection --upgrade
Requirement already up-to-date: fritzconnection in /usr/local/lib/python2.7/dist-packages
Collecting requests>=2.2.0 (from fritzconnection)
Downloading requests-2.18.4-py2.py3-none-any.whl (88kB)
100% |████████████████████████████████| 92kB 763kB/s
Collecting lxml>=3.2.5 (from fritzconnection)
Using cached lxml-4.1.1.tar.gz
Collecting urllib3=1.21.1 (from requests>=2.2.0->fritzconnection)
Downloading urllib3-1.22-py2.py3-none-any.whl (132kB)
100% |████████████████████████████████| 133kB 880kB/s
Collecting idna=2.5 (from requests>=2.2.0->fritzconnection)
Downloading idna-2.6-py2.py3-none-any.whl (56kB)
100% |████████████████████████████████| 61kB 1.5MB/s
Collecting chardet=3.0.2 (from requests>=2.2.0->fritzconnection)
Downloading chardet-3.0.4-py2.py3-none-any.whl (133kB)
100% |████████████████████████████████| 143kB 983kB/s
Collecting certifi>=2017.4.17 (from requests>=2.2.0->fritzconnection)
Downloading certifi-2017.11.5-py2.py3-none-any.whl (330kB)
100% |████████████████████████████████| 337kB 629kB/s
Building wheels for collected packages: lxml
Running setup.py bdist_wheel for lxml … /^error
Failed building wheel for lxml
Running setup.py clean for lxml
Failed to build lxml
Installing collected packages: urllib3, idna, chardet, certifi, requests, lxml
Found existing installation: urllib3 1.19.1
Not uninstalling urllib3 at /usr/lib/python2.7/dist-packages, outside environment /usr
Found existing installation: idna 2.2
Not uninstalling idna at /usr/lib/python2.7/dist-packages, outside environment /usr
Found existing installation: chardet 2.3.0
Not uninstalling chardet at /usr/lib/python2.7/dist-packages, outside environment /usr
Found existing installation: requests 2.12.4
Not uninstalling requests at /usr/lib/python2.7/dist-packages, outside environment /usr
Found existing installation: lxml 3.7.1
Not uninstalling lxml at /usr/lib/python2.7/dist-packages, outside environment /usr
Running setup.py install for lxml … |^canceled
Can’t rollback lxml, nothing uninstalled.
Operation cancelled by user -
Please read this befor you update your Fritzbox with a new FritzOS!
I upgraded my Fritzbox 6490 to the new FritzOS 7 and the callmonitor stoped working. I tried to but I could not reactivate the callmonitor. Nothing seemed to work and I thought I did something wrong. I contacted AVM to help and got a realy bad answer: They told me that AVM has removed the callmonitor functionality. I asked them how I could downgrade the OS to get the functionality back but they told me that there is no downgrade option. They also told me that they are going to remove the callmonitor functionality from all of their routers OSs.
Warning to everyone: If you want to keep on using the callmonitor do not install FritzOS updates without checking if the new OS still supports the callmonitor. I would aks AVM befor updating.I am not sure if it helps but maybe everyone should write them an email and ask to keep or bring back this feature?!
With this plugin I now can only see incomming calls (only the number) but no list with history of calls anymore. :o(
-
@Cyberdyne - Hmmmm thats strange. I am using a 7590 with the actual AVM OS7.01 from 20th September (and early Beta Versions) and the Call Monitor and Current Call works (with the 7590 and 7490) very well …
Sandy2503
-
I can only say what AVM has told me. Callmonitor is removed from the 6490 with the OS 7.0 and they also told me that they will remove it from all other boxes as well. They did not tell me in which version on which box. Hete are some emals:
"Sie schildern, dass Sie den Callmonitor nicht mehr aktivieren können und möchten wissen, wieso dies der Fall ist. Ich bedauere diesen Umstand und nehme mich gerne der Sache an.
Der Callmonitor wird mittlerweile nicht mehr von den FRITZ!Boxen unterstützt. Wenn Sie mit mitteilen, was genau Sie vorhaben, kann ich Ihnen ggf. Alternativen aufzeigen. "
"Sie möchten wissen, bei welchen FRITZ!OS der Callmonitor noch unterstützt wird und wie Sie Ihre FRITZ!Box 6490 entsprechend downgraden können. Gerne beantworte ich Ihnen Ihre Frage.
Ab welchen FRITZ!OS der Collmonitor nicht mehr unterstützt wurde, kann ich Ihnen nicht sagen, da dieser aufgrund der unterschiedlichen FRITZ!OS der verschiedenen FRITZ!Box-Modellen sukzessiv geschehen ist.
Ein Downgrade von dem FRITZ!OS bei FRITZ!Box Cable ist leider nicht möglich."
Just be carefull and better ask befor you make an other update if you want to keep on using the callmonitor! It does not work here anymore and no way back. :(
-
Hi guys,
how can I hide the call history, since the Fritz-Boxes Callmonitor seems to be deactivated in OS 7 and I want to keep at least the alert pop-up. -
Re: MMM-FRITZ-Box-Callmonitor
Hi all,
i cannot get the module up and running.
I’ve tried all the above solutions and nothing really worked.
We got 2 FritzBoxes at work. One is our router (7590) and the other one (6490) is used as a cable modem and for the telephone connections.
Callerid and TR-064 access are activated on the 6490 and it is running with OS 6.50. The user i created has access to the FritzBox and has all the necessary rights.
I’ve tried a CallerMonitor App on macOS and it worked fine.This is my config:
{ module: 'MMM-FRITZ-Box-Callmonitor', position: 'bottom_left', header: "Anrufe", config: { password: "PASSWORD", username: "USERNAME", fritzIP: "130.180.xx.xx", reloadContactsInterval: 1, vCard: false }When i test the connection with:
python fritz_access.py -p PASSWORD -u USER -i 130.180.xx.xxi get this:
Traceback (most recent call last): File "fritz_access.py", line 77, in main(args) File "fritz_access.py", line 63, in main handle.download_phone_book() File "fritz_access.py", line 22, in download_phone_book result = self.fc.call_action("X_AVM-DE_OnTel", "GetPhonebookList") File "/usr/local/lib/python2.7/dist-packages/fritzconnection/fritzconnection.py", line 406, in call_action return action.execute(**kwargs) File "/usr/local/lib/python2.7/dist-packages/fritzconnection/fritzconnection.py", line 130, in execute result = self.parse_response(response.content) File "/usr/local/lib/python2.7/dist-packages/fritzconnection/fritzconnection.py", line 142, in parse_response root = etree.fromstring(response) File "src/lxml/etree.pyx", line 3222, in lxml.etree.fromstring File "src/lxml/parser.pxi", line 1877, in lxml.etree._parseMemoryDocument File "src/lxml/parser.pxi", line 1765, in lxml.etree._parseDoc File "src/lxml/parser.pxi", line 1127, in lxml.etree._BaseParser._parseDoc File "src/lxml/parser.pxi", line 601, in lxml.etree._ParserContext._handleParseResultDoc File "src/lxml/parser.pxi", line 711, in lxml.etree._handleParseResult File "src/lxml/parser.pxi", line 640, in lxml.etree._raiseParseError File "", line 1 lxml.etree.XMLSyntaxError: Opening and ending tag mismatch: HR line 1 and BODY, line 1, column 180All phonebook entries are in the formats 004902211234567 or 02211234567.
The callermonitor seems to work as it shows incoming numbers but the recent calls and phonebook function are broken.
Anyone has any thoughts about that? Any kind of solution
Best,
-
-
Hi all,
this is my first post, so please be patient with me ;)
I´m trying to use MMM-FRITZ-Box-Callmonitor, but I have some problems, although I followed nearly every hint in this discussion.- When someone is calling, I can see his number but not his name on the screen.
- The latest calls only were shown when I don´t config password and username. Why is that?
- when I test the connection with:
python fritz_access.py -p PASSWORD -u USER -i xxx.xxxx.xx.xxI retrieve all the data from my Fritzbox, so the connection should not be the problem.
At least I tried the recommended fix of wunderbear, but after a reboot I only get a black screen (with the cursor top-left) after starting the MagicMirror. What is the reason and how can I solve these problems? I don´t want to start all other again :weary_face:
I hope, that someone can help me to fix my problems.
Thanks and regards
Laurids -
@Laurids Did you solve the Problem? Same here!
-
Hi,
I cannot get the module to work with my FB6590 Cable on FritzOS 7.19.
CallMonitor is switched on.When I try to access it with python fritz_access-py -p PASS -u USER -i IP I get the following:
My “real” phonebook is a Google phonebook which is automatically imported by the FB, I do not use (and do not want to use) the internal phonebook.
Also, no recent calls are being shown.{"content": "<?xml version=\"1.0\" encoding=\"UTF-8\"?> <phonebooks> <!-- id:0 , name: Telefonbuch --> <phonebook owner=\"0\" name=\"Telefonbuch\"> <timestamp>948668907</timestamp> <!-- number of contacts 12 --> <contact> <category>0</category> <person> <realName>Alle (Rundruf)</realName> </person> <uniqueid>11</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"intern\" vanity=\"\" prio=\"1\" >**9</number> <!-- idx:0 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>Anrufbeantworter</realName> </person> <uniqueid>12</uniqueid> <telephony> <services> </services> <!-- numbers:2--> <number type=\"intern\" vanity=\"\" prio=\"1\" >**600</number> <number type=\"memo\" vanity=\"\" prio=\"\" >**605</number> <!-- idx:1 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>AVM Ansage (HD)</realName> </person> <uniqueid>22</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"work\" quickdial=\"99\" vanity=\"\" prio=\"1\" >500@hd-telefonie.avm.de</number> <!-- idx:0 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>B\u00fcro</realName> </person> <uniqueid>13</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"intern\" vanity=\"\" prio=\"1\" >**611</number> <!-- idx:2 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>Fax</realName> </person> <uniqueid>14</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"intern\" vanity=\"\" prio=\"1\" >**2</number> <!-- idx:3 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>FRITZ!App Fon (Samsung SM-G965F)</realName> </person> <uniqueid>27</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"intern\" vanity=\"\" prio=\"1\" >**620</number> <!-- idx:4 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>ISDN/DECT Rundruf</realName> </person> <uniqueid>16</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"\" vanity=\"\" prio=\"1\" >**50</number> <!-- idx:5 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>K\u00fcche</realName> </person> <uniqueid>17</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"intern\" vanity=\"\" prio=\"1\" >**610</number> <!-- idx:6 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>Schlafen</realName> </person> <uniqueid>18</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"intern\" vanity=\"\" prio=\"1\" >**612</number> <!-- idx:7 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>Wecker 1</realName> </person> <uniqueid>19</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"\" vanity=\"\" prio=\"1\" >**41</number> <!-- idx:8 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>Wecker 2</realName> </person> <uniqueid>20</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"\" vanity=\"\" prio=\"1\" >**42</number> <!-- idx:9 --> <!-- ringtoneidx:nil --> </telephony> </contact> <contact> <category>0</category> <person> <realName>Wecker 3</realName> </person> <uniqueid>21</uniqueid> <telephony> <services> </services> <!-- numbers:1--> <number type=\"\" vanity=\"\" prio=\"1\" >**43</number> <!-- idx:10 --> <!-- ringtoneidx:nil --> </telephony> </contact> </phonebook></phonebooks> ", "filename": "data/pbook_0.xml"} Traceback (most recent call last): File "fritz_access.py", line 77, in <module> main(args) File "fritz_access.py", line 63, in main handle.download_phone_book() File "fritz_access.py", line 29, in download_phone_book self.forward_file(result_phonebook["NewPhonebookURL"], filename) KeyError: 'NewPhonebookURL'Incoming calls are being displayed with the number on the screen, but are not shown in the recent calls list.
Edit: It works when I use a .vcf file, but I’d really like to use my builtin phonebook and also grab recent calls.
-
In case you haven’t noticed, @paviro is looking for a maintainer for this module.
https://github.com/paviro/MMM-FRITZ-Box-Callmonitor/issues/40Would love to see this working!
-
So far, no maintainer.
Anyone else noticing that the module is not working with FRITZ!OS 7.20 anymore? (FB6590 Cable here, was working with the betas).
-
Today a made a fresh installation on my Pi4 with the latest Buster and MagicMirror 2.12
I installed the modules FRITZBox-Callmonitor & Current Call
in the root:
sudo apt-get install python-dev libxml2-dev libxslt1-dev zlib1g-dev && sudo pip install fritzconnectionand i fix the files from this Post -->
and it works very well in combination with my Fritzbox 7590 running on 7.20
Best Regards
-
@Sandy2503
My screen is black after installing it.In the browser he shows me this error.
Uncaught SyntaxError: Unexpected token / in JSON at position 79 at JSON.parse () at XMLHttpRequest.xhr.onreadystatechange (translator.js:22) (index):1 Unchecked runtime.lastError: The message port closed before a response was received. -
@Ghost2000 looking at it again that is the translation error I sent you
https://github.com/paviro/MMM-FRITZ-Box-Callmonitor/blob/master/translations/de.jsonedit out the comment line, not allowed in json file
-
you are the best , i have it
changed don´t work :( -
@Ghost2000 need more info than “don’t work”
-
0 info it worked if it ends with ok 1 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ] 2 info using npm@6.14.6 3 info using node@v10.22.1 4 verbose run-script [ 'prestart', 'start', 'poststart' ] 5 info lifecycle magicmirror@2.13.0~prestart: magicmirror@2.13.0 6 info lifecycle magicmirror@2.13.0~start: magicmirror@2.13.0 7 verbose lifecycle magicmirror@2.13.0~start: unsafe-perm in lifecycle true 8 verbose lifecycle magicmirror@2.13.0~start: PATH: /usr/lib/node_modules/npm/node_modules/npm-lifecycle/node-gyp-bin:/home/pi/MagicMirror/node_modules/.bin:/home/pi/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bi$ 9 verbose lifecycle magicmirror@2.13.0~start: CWD: /home/pi/MagicMirror 10 silly lifecycle magicmirror@2.13.0~start: Args: [ '-c', 10 silly lifecycle 'DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js' ] 11 silly lifecycle magicmirror@2.13.0~start: Returned: code: 1 signal: null 12 info lifecycle magicmirror@2.13.0~start: Failed to exec start script 13 verbose stack Error: magicmirror@2.13.0 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` 13 verbose stack Exit status 1 13 verbose stack at EventEmitter.<anonymous> (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/index.js:332:16) 13 verbose stack at EventEmitter.emit (events.js:198:13) 13 verbose stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14) 13 verbose stack at ChildProcess.emit (events.js:198:13) 13 verbose stack at maybeClose (internal/child_process.js:982:16) 13 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5) 14 verbose pkgid magicmirror@2.13.0 15 verbose cwd /home/pi/MagicMirror 16 verbose Linux 5.4.51-v7l+ 17 verbose argv "/usr/bin/node" "/usr/bin/npm" "start" 18 verbose node v10.22.1 19 verbose npm v6.14.6 20 error code ELIFECYCLE 21 error errno 1 22 error magicmirror@2.13.0 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js` 22 error Exit status 1 23 error Failed at the magicmirror@2.13.0 start script. 23 error This is probably not a problem with npm. There is likely additional logging output above. 24 verbose exit [ 1, true ]Browser Log:
(index):5 Uncaught SyntaxError: Unexpected token / in JSON at position 79 at JSON.parse (<anonymous>) at XMLHttpRequest.xhr.onreadystatechange (translator.js:22)Dev Log
npm start dev > magicmirror@2.13.0 start /home/pi/MagicMirror > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js "dev" [2020-10-14 14:23:35.170] [LOG] Starting MagicMirror: v2.13.0 [2020-10-14 14:23:35.178] [LOG] Loading config ... [2020-10-14 14:23:35.184] [LOG] Loading module helpers ... [2020-10-14 14:23:35.187] [LOG] No helper found for module: alert. [2020-10-14 14:23:35.231] [LOG] Initializing new module helper ... [2020-10-14 14:23:35.232] [LOG] Module helper loaded: updatenotification [2020-10-14 14:23:35.234] [LOG] No helper found for module: MMM-Globe. [2020-10-14 14:23:35.235] [LOG] No helper found for module: MMM-Carousel. [2020-10-14 14:23:35.236] [LOG] No helper found for module: clock. [2020-10-14 14:23:35.422] [LOG] Initializing new module helper ... [2020-10-14 14:23:35.422] [LOG] Module helper loaded: MMM-FRITZ-Box-Callmonitor [2020-10-14 14:23:36.306] [LOG] Initializing new module helper ... [2020-10-14 14:23:36.306] [LOG] Module helper loaded: MMM-awesome-alexa [2020-10-14 14:23:36.307] [LOG] No helper found for module: iFrame. [2020-10-14 14:23:36.664] [LOG] Initializing new module helper ... [2020-10-14 14:23:36.665] [LOG] Module helper loaded: MMM-NowPlayingOnSpotify [2020-10-14 14:23:37.016] [LOG] Initializing new module helper ... [2020-10-14 14:23:37.017] [LOG] Module helper loaded: calendar [2020-10-14 14:23:37.018] [LOG] Initializing new module helper ... [2020-10-14 14:23:37.019] [LOG] Module helper loaded: MMM-OnScreenMenu [2020-10-14 14:23:37.019] [LOG] No helper found for module: compliments. [2020-10-14 14:23:37.158] [LOG] Initializing new module helper ... [2020-10-14 14:23:37.159] [LOG] Module helper loaded: internet-monitor [2020-10-14 14:23:37.440] [LOG] Initializing new module helper ... [2020-10-14 14:23:37.441] [LOG] Module helper loaded: MMM-DWD-WarnWeather [2020-10-14 14:23:37.442] [LOG] No helper found for module: MMM-windy. [2020-10-14 14:23:37.442] [LOG] No helper found for module: currentweather. [2020-10-14 14:23:37.571] [LOG] Initializing new module helper ... [2020-10-14 14:23:37.571] [LOG] Module helper loaded: MMM-Remote-Control [2020-10-14 14:23:37.572] [LOG] No helper found for module: weatherforecast. [2020-10-14 14:23:37.573] [LOG] Initializing new module helper ... [2020-10-14 14:23:37.574] [LOG] Module helper loaded: MMM-SmartTouch [2020-10-14 14:23:37.594] [LOG] Initializing new module helper ... [2020-10-14 14:23:37.594] [LOG] Module helper loaded: newsfeed [2020-10-14 14:23:37.595] [LOG] All module helpers loaded. [2020-10-14 14:23:37.692] [LOG] Starting server on port 8080 ... [2020-10-14 14:23:37.694] [INFO] You're using a full whitelist configuration to allow for all IPs [2020-10-14 14:23:37.700] [LOG] Server started ... [2020-10-14 14:23:37.701] [LOG] Connecting socket for: updatenotification [2020-10-14 14:23:37.702] [LOG] Connecting socket for: MMM-FRITZ-Box-Callmonitor [2020-10-14 14:23:37.703] [LOG] Starting module: MMM-FRITZ-Box-Callmonitor [2020-10-14 14:23:37.704] [LOG] Connecting socket for: MMM-awesome-alexa [2020-10-14 14:23:37.705] [LOG] Connecting socket for: MMM-NowPlayingOnSpotify [2020-10-14 14:23:37.706] [LOG] Connecting socket for: calendar [2020-10-14 14:23:37.706] [LOG] Starting node helper for: calendar [2020-10-14 14:23:37.707] [LOG] Connecting socket for: MMM-OnScreenMenu [2020-10-14 14:23:37.708] [LOG] Connecting socket for: internet-monitor [2020-10-14 14:23:37.709] [LOG] internet-monitor helper started ... [2020-10-14 14:23:37.709] [LOG] Connecting socket for: MMM-DWD-WarnWeather [2020-10-14 14:23:37.710] [LOG] MMM-DWD-WarnWeather helper started... [2020-10-14 14:23:37.710] [LOG] Connecting socket for: MMM-Remote-Control [2020-10-14 14:23:37.711] [LOG] Starting node helper for: MMM-Remote-Control [2020-10-14 14:23:37.717] [LOG] Connecting socket for: MMM-SmartTouch [2020-10-14 14:23:37.718] [LOG] Connecting socket for: newsfeed [2020-10-14 14:23:37.718] [LOG] Starting node helper for: newsfeed [2020-10-14 14:23:37.719] [LOG] Sockets connected & modules started ... [2020-10-14 14:23:37.726] [ERROR] Whoops! There was an uncaught exception... [2020-10-14 14:23:37.727] [ERROR] Error: listen EADDRINUSE: address already in use 0.0.0.0:8080 at Server.setupListenHandle [as _listen2] (net.js:1226:14) at listenInCluster (net.js:1274:12) at doListen (net.js:1413:7) at processTicksAndRejections (internal/process/task_queues.js:84:9) { code: 'EADDRINUSE', errno: 'EADDRINUSE', syscall: 'listen', address: '0.0.0.0', port: 8080 } [2020-10-14 14:23:37.732] [ERROR] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? [2020-10-14 14:23:37.733] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues [2020-10-14 14:23:37.808] [LOG] Launching application. -
@Ghost2000 there are two files that need to be fixed. de and en.json
you must remove the comment line.put the json file contents in one of the online validators to test your edit
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login