Posts made by Manino

@sdetweil I did try with another hdmi cable with no success, after that I lower the frequency, first it seemed to work but then the second time I rotate the screen went all black. This is so strange. It did work perfect a couple of month ago.

Hello, when I do rotate screen with the screen configuration the screen went all black and I have to restart the raspberry pi with the cable. Anyone know what happen? 1 of 10 times it work and the rest of it the screen went all black so it’s not everytime.

I did the install of the MMM-PhoneDetect but can’t get it to work. Does anyone know what do to? There seem to be no conection between my phone and the module. It’s a grey dot on the screen that is supposed to be green. When I did the log check I get this:

m@raspberrypi:~ $ pm2 logs
[TAILING] Tailing last 15 lines for [all] processes (change the value with --lines option)
/home/m/.pm2/pm2.log last 15 lines:
PM2        | 2024-06-16T14:23:34: PM2 log: App [MagicMirror:0] starting in -fork mode-
PM2        | 2024-06-16T14:23:34: PM2 log: App [MagicMirror:0] online
PM2        | 2024-06-16T14:39:28: PM2 log: Change detected on path config/config.js for app MagicMirror - restarting
PM2        | 2024-06-16T14:39:28: PM2 log: Stopping app:MagicMirror id:0
PM2        | 2024-06-16T14:39:29: PM2 error: Error: kill EPERM
PM2        | 2024-06-16T14:39:29: PM2 error: Error: kill EPERM
PM2        | 2024-06-16T14:39:29: PM2 log: pid=859 msg=failed to kill - retrying in 100ms
PM2        | 2024-06-16T14:39:29: PM2 log: pid=859 msg=failed to kill - retrying in 100ms
PM2        | 2024-06-16T14:39:29: PM2 log: pid=859 msg=failed to kill - retrying in 100ms
PM2        | 2024-06-16T14:39:29: PM2 log: pid=859 msg=failed to kill - retrying in 100ms
PM2        | 2024-06-16T14:39:29: PM2 log: pid=859 msg=failed to kill - retrying in 100ms
PM2        | 2024-06-16T14:39:29: PM2 log: App [MagicMirror:0] exited with code [0] via signal [SIGINT]
PM2        | 2024-06-16T14:39:30: PM2 log: pid=859 msg=process killed
PM2        | 2024-06-16T14:39:30: PM2 log: App [MagicMirror:0] starting in -fork mode-
PM2        | 2024-06-16T14:39:30: PM2 log: App [MagicMirror:0] online

/home/m/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | [1193:0616/142444.467634:ERROR:atom_cache.cc(229)] Add WM_CHANGE_STATE to kAtomsToCache
0|MagicMir | [2024-06-16 14:39:29.388] [ERROR] MMM-PhoneDetect: Error performing nmap scan: Command failed: sudo nmap -sn 192.168.1.0/24
0|MagicMir |  
0|MagicMir | [2024-06-16 14:39:29.400] [ERROR] (node:1193) UnhandledPromiseRejectionWarning: Error: Command failed: sudo nmap -sn 192.168.1.0/24
0|MagicMir | 
0|MagicMir |     at ChildProcess.exithandler (node:child_process:422:12)
0|MagicMir |     at ChildProcess.emit (node:events:514:28)
0|MagicMir |     at maybeClose (node:internal/child_process:1105:16)
0|MagicMir |     at Socket.<anonymous> (node:internal/child_process:457:11)
0|MagicMir |     at Socket.emit (node:events:514:28)
0|MagicMir |     at Pipe.<anonymous> (node:net:337:12)
0|MagicMir | (Use `electron --trace-warnings ...` to show where the warning was created) 
0|MagicMir | [2024-06-16 14:39:29.401] [ERROR] (node:1193) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). To terminate the node process on unhandled promise rejection, use the CLI flag `--unhandled-rejections=strict` (see https://nodejs.org/api/cli.html#cli_unhandled_rejections_mode). (rejection id: 1) 
0|MagicMir | /home/manino/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT
0|MagicMir | [3682:0616/144334.609151:ERROR:atom_cache.cc(229)] Add WM_CHANGE_STATE to kAtomsToCache

/home/m/.pm2/logs/MagicMirror-out.log last 15 lines:
0|MagicMir | [2024-06-16 15:09:17.175] [LOG]   MMM-PhoneDetect: Mirror turned off. 
0|MagicMir | [2024-06-16 15:09:17.915] [LOG]   MMM-PhoneDetect: Turning off the mirror... 
0|MagicMir | [2024-06-16 15:09:17.942] [LOG]   MMM-PhoneDetect: Mirror turned off. 
0|MagicMir | [2024-06-16 15:09:22.384] [LOG]   MMM-PhoneDetect: Turning off the mirror... 
0|MagicMir | [2024-06-16 15:09:22.439] [LOG]   MMM-PhoneDetect: Mirror turned off. 
0|MagicMir | [2024-06-16 15:09:23.045] [LOG]   MMM-PhoneDetect: Turning off the mirror...

@sdetweil And what is another.module?

I have the MMM-ModuleController, MMM-Calculator, MMM-DrawingBoard. Do you mean someone of those or is it something else? I do understand what is supposed to happen, but can’t figure out HOW to do it with those lines.

@sdetweil Yes, but should I copy paste it into config or what?

I’m on a very low level of the Magic Mirror, have been here for only a month and I can’t understand were to put the line or lines. I have tried at least 50 different places, in files, cofig, and also the css. I can’t do it right.

@sdetweil What other modules?

@Pjarki Funny modules! I have them now, and have been thinking about to not use the MMM-ModuleController. I like the blurry background for the calculator. But there is one issue with the MMM-DrawingBoard for me, It is a bit laggy.

Do you know if it’s because of the non existing ModuleController in my config?

First of all then, I don’t know where to put these, can you tell me where to put them?

this.sendNotification(‘HIDE_MODULES’, { exceptionList: [“MMM-DrawingBoard”] });

this.sendNotification(‘SHOW_MODULES’);

@sdetweil It was a great upgrade

@sdetweil Yes that’s correct, I wan’t an preview of the image to click on. Either an folder or just pictures you can make bigger by click on it.

I don’t use the display with an mirror, so fingerprints wouldn’t be a problem for me.

Maybe I have to make more pages and add big pictures instead.