Topics created by MattG

@elmerito25 Hi:

Thanks for the reply. The PIR has two rheostats labeled Sx and Tx, so which is which. I’m tempted to dispense with the PIR altogether and just use the monitor on/off switch to activate the display. But, I’ll mess with the PIR when I get a chance and see if I can get anywhere. Using Board numbering, the PIR has its VCC pin wired to pin 4, its ground pin wired to Pin 6 and its signal pin wired to Pin 7. I set the pin number in my config.js file to 4 (Board pin 7 is GPIO pin 4). Would there be any problem with this wiring?

Inch by inch . . .

I was able to get the iFrame to at least show something, simply by changing the url to this

module: 'iFrame', position: 'top_right', // This can be any of the regions. config: { url: "http://www.ustream.tv/channel/iss-hdev-payload", width: "300px", // Optional. Default: 100% or Example "200px" height: "200px", //Optional. Default: 100px or Example "300px" } },

The iFrame opens on that page. I can see the logo of the page, but the scroll bars on the iFrame don’t function so I cannot position the view of the page. It’s a live feed from the International Space Station

@onetwankyfive

This is absolutely perfect. And I see you mentioned it before. Sorry for not reading as thoroughly as I should’ve. Thank you!!

@yawns

Awesome! Thank you again! I will definitely be trying this out after work today. Cheers!