Posts made by Miked180

Miked180

its enough to write in english ,

Miked180

So i have install the git and sudo apt-get install motion

, USb Camera is connected, now who can use this, nothing happend,

in Config.js -> source. ‘external’

You should get many bottles of beer for your help

Miked180

than i use this, so i know if i have a question who can help :D

Miked180

And you know a better Modul for Wake up or sleepof teh mirror ?,

I can use a usb Micro or a usb Camera,

i will only sleep and wake up the mirror , not more and easist way.

Miked180

Thanks for your very n1 support

Miked180

Ok thanks, i use this git in future

My Problem with black screen was really the modul : MMM-Motion Detection,

Miked180

Hi, have someone use this module

MMM-Voice

There is a broken link for Documenatation.

I think ist a good idea tocontrol de mirror over voice.

After Install i can see my words which i said sho on teh mirror ( sometimes not correct)

But i cant controll anithing. I have install and insert in config.

Now who can i example turn of Mirror or wake up,… or sho a modul,…

i need not more

Answer in english or german (german better)

Miked180

yes, i used the install script from : https://www.doityourself.rocks/magicmirror/diy-magic-mirror-3-magic-mirror-software-installieren-und-konfigurieren/

bash -c ‚$"(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)"

Is thsi your script or whats your script ? Link :

Miked180

I have solved:

After command pm2 startup --> i have add teh command ( listen as info aofter this entered)

sudo env PATH=$PATH:/usr/bin /usr/lib/node_modules/pm2/bin/pm2 startup systemd -u pi --hp /home/pi

now it works, better read from my side :)

Miked180

I have make a new setup now it will not start after autostart. I have make the same as last timer and from tutorial
https://www.doityourself.rocks/magicmirror/diy-magic-mirror-3-magic-mirror-software-installieren-und-konfigurieren/

if i command: pm2 start mm.sh -_> it starts

or

command: pm2 update -_> it starts

1: i have create file mm.sh
2. pm2 startup
3. pm2 start mm.sh
4. sudo pm2 save

mostly comes the message , use: pm2 save --force

and after sudo reboot its the same , no autostart.

Last setup this works normaly

Miked180

i make now a new setpu, its better and cleaner, thansk very much for your big support

Miked180

tis is in your link . or on the flase position in the page ?

Sorry i dont know about this .

Im learning since short time but im not so good as you :-=

UPDATE : i geht : setterm: terminal xterm-256color does not support --blank

if i use your command

Miked180

thanks for your help,

der is no file in /etc/X11/xorg.conf.d

:(((((

ist better to make a new setup ??

in ssh terminal session, may have to do export DISPLAY=:0 ?

Miked180

Now i got a black screen.

from 283Z-debug.log :

after restart raspberry i see the mirror

Miked180

now i see the mirror, i wait few minutes

Miked180

pi@raspberrypi:~/MagicMirror/config $ pm2 logs --lines=100
[TAILING] Tailing last 100 lines for [all] processes (change the value with --lines option)
/home/pi/.pm2/pm2.log last 100 lines:
PM2 | 2020-03-11T18:29:32: PM2 log: App [MagicMirror:0] starting in -fork mode-
PM2 | 2020-03-11T18:29:32: PM2 log: App [MagicMirror:0] online

Miked180

See Link. I cant post log here

Log File

Miked180

I found this in Log File:

pm2 log MagicMirror

Miked180

i have delete MMM-Motion Detector from the config.js and since this i have no black screen, i will test for longer timer

I wait for tomorrow for my new cas with fan cooler . I have 70 ° Temp now , this is to much , maybe this is the problem too

Thansk now for the big help, in the next days i know more .