Palma de Mallorca, Spain.

@teemuoksanen said in [MMM-Remote-Control] Cannot GET /api:

I have exactly the same problem - all API calls result in error “Cannot GET /api/whatevermoduleitrytocall”. However, remote.html loads just fine.

As I have.

Edited: It was a mistake, sorry. I have same problem.

@Sean said in MMM-WeatherBackground question:

Sorry for incomplete information on repository.

Don’t worry. It was just to contribute!

Solved in https://forum.magicmirror.builders/topic/10244/photo-notification-depending-on-weather

@Sean said in MMM-WeatherBackground question:

@lkthomas
You can use these as keywords.

sunny, clouds, cloudy, windy, heavy rain, rain, thunderstorm, snow, fog, clear night, cloudy night, night rain, night thunderstorm, night snow, windy night

Hi Sean, your module is really very nice, thank You.
I was working with collections and I couldn’t make module loads my ones, despite your instructions in the 2 previous posts.
So, I took a look to console log and see that You url always appends in the url the weather conditions. When condititions carry on “-” between words, your url also carry on that sign.
I meant, when I wrote in config.js

collections: {
				  "clear-day": "4613658"
				  "sunny": "4613658",
				  "clouds": "4557538",
				  "cloudy": "4557538",
				  "cloudy night": "4613565",
				  "partly cloudy day": "4618566",
				  "partly cloudy night": "4618856",
				  "windy": "4613696",
				  "wind": "4613696",
				  "heavy rain": "4613730",
				  "rain": "4613732",
				  "night rain": "4613625",
				  "clear night": "4613623",
				  "fog": "4618886",
				  "thunderstorm": "4613853",
				  "tornado": "4619143",
				  /*"hail": "",
				  "i-rain": "",
				  "i-wind": "",
				  "sleet": "",
				  "snow": "",*/

featured photos was loaded anyway.
But when I did set collections in this way:

				  "clear-day": "4613658",  
				  "sunny": "4613658",
				  "clouds": "4557538",
				  "cloudy": "4557538",
				  "cloudy-night": "4613565",
				  "partly-cloudy-day": "4618566",
				  "partly-cloudy-night": "4618856",
				  "windy": "4613696",
				  "wind": "4613696",
				  "heavy-rain": "4613730",
				  "rain": "4613732",
				  "night-rain": "4613625",
				  "clear-night": "4613623",
				  "fog": "4618886",
				  "thunderstorm": "4613853",
				  "tornado": "4619143",
				  /*"hail": "",
				  "i-rain": "",
				  "i-wind": "",
				  "sleet": "",
				  "snow": "",*/

photos I collected was loaded fine.
clear-day was worked but today was a partly-cloudy-day
Last commented conditions I don’t know what it means but snow, but in my place never goes snow.
Collections was “collected” from unsplash people following unsplash rules, so, I think any people can use it for MagicMirror. Feel free to use it for this wonderful module. Thank you.

Sometimes, unsplash could return mismatched images with keyword.

By using mentioned collections this won’t happen.

@Sean said in photo notification depending on weather:

@mohace
MMM-WeatherBackground would get weather info from some weather module, then would search e from unsplash.com, then put the image into any position.

I didn’t know that module when I asked in the other post. Thank you!!

@Sean said in photo notification depending on weather:

@ines
Maybe https://github.com/eouia/MMM-WeatherBackground this could be what you seek.

Hi. I think he is asking same as me in https://forum.magicmirror.builders/topic/10167/true-challenge-weather-modules-developers

@TamP Sorry, I don’t know. I figured out that this page give you de city id.
There are anothers modules that gives current weather and forecast using another apis and working with coordinates, for example, https://github.com/mykle1/MMM-BMW-DS
You can zoom the icons by css if they were to small.
Sorry, I don’t know another way to help you.

@TamP said in Local weather on MagicMirror:

Just got the MagicMirror running on my Pi3 B+
I am trying to get my local UK area weather to display, but the openweather api only seems to have a few UK areas listed in the city list, which are of no use to me.
Is it possible to get a local weather display.

Did you try in https://openweathermap.org/find ?

Hi, I passed hours trying, but it was not possible. Maybe one of you can.
I am asking for a current weather module that show a picture in ‘fullscreen_below’ position. In that way, the wallpaper would show pics according with responses from the weather server for the current weather.
First of all I asked in WallberryTheme issues, but it seemed not to be the right place (module issues).
I thought in WallberryTheme as it has wallpaper, time and weather modules. For me is the best one candidate to integrate.
But indeed, there are many other candidates for the integration.
For example default Current Weather, but also many others as you can see in 3rd-party-modules.
The wallpapers modules could be any of MMM-BackgroundSlideshow (local pics),, MMM-Google Photos, MMM-Random Photo, and maybe MMM-DropboxWallpaper,.
WallberryTheme takes picture from unsplash.com.
It needs apikey, but could be without. For example, you can take a look to this collection I created, WI-cloudy,. This will show a random photo from collection. Calling unsplash without an api permits developer to create collections with pictures according familiar names (with apikey it would need several ones, one by each WI currentweather, sun, clouds, rain, snow, fog, etc.).
MMM-Google Photos would need several apikeys, or photos named, for example, we-cloudy-01, WI-cloudy-02, etc. if we want to work with only one apikey.
MMM-Random Photo shows a random photo from a url. It could be from source.unsplash.com in the way I pointed previously.
MMM-DropboxWallpaper perhaps, but it would need to save the pics with WI-cloudy-01, WI-cloudy-02, etc., names.
Well, this is all I investigate to reach the subject objective, but I don’t know how to encode.
Of course a true challenge could start all from scratch.
I hope that any of you want to take over on this.
Thank you.