Posts made by monark

I tried this module from https://github.com/ban9975/HPS-FaceID but after successfully installing everything and rebooting and putting in the config. it doesn’t work.
config.js base with only this, I get the default logo coming out.
I tried creating a datasheet with my face photos and then I created a photo as a profile but it doesn’t work. while running mm I tried mashing the FaceID and AddProfile buttons but nothing. I wanted to write directly to whoever created this fork but it is not possible to point out the problem there.

@sdetweil change to opencv-python from opencv-python-headless…
I’m try to find with google but it seems they are talking about something else (SSL). anyway you recommended me to use this form because it explained how to install and it was easier…

@sdetweil i try with sudo apt install libssl.so.3 but not working “impossible find the packet”

@sdetweil it’s strange because I’ve updated everything

@sdetweil maybe the problem is i have libcamera-still (rpi4, bulleye, 32bit, camera v3)

@sdetweil my cmd error

pip install face-recognition numpy dlib picamera2 opencv-python
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting face-recognition
  Downloading https://www.piwheels.org/simple/face-recognition/face_recognition-1.3.0-py2.py3-none-any.whl (15 kB)
Requirement already satisfied: numpy in /usr/lib/python3/dist-packages (1.19.5)
Collecting dlib
  Downloading https://www.piwheels.org/simple/dlib/dlib-19.24.6-cp39-cp39-linux_armv7l.whl (3.4 MB)
     |################################| 3.4 MB 1.3 MB/s 
Requirement already satisfied: picamera2 in /usr/lib/python3/dist-packages (0.3.12)
Collecting opencv-python
  Downloading opencv-python-4.10.0.84.tar.gz (95.1 MB)
     |################################| 95.1 MB 59 kB/s 
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
    Preparing wheel metadata ... done
Requirement already satisfied: Pillow in /usr/lib/python3/dist-packages (from face-recognition) (8.1.2)
Collecting face-recognition-models>=0.3.0
  Downloading https://www.piwheels.org/simple/face-recognition-models/face_recognition_models-0.3.0-py2.py3-none-any.whl (100.6 MB)
     |################################| 100.6 MB 83 kB/s 
Requirement already satisfied: Click>=6.0 in /usr/lib/python3/dist-packages (from face-recognition) (7.1.2)
Requirement already satisfied: v4l2-python3 in /usr/lib/python3/dist-packages (from picamera2) (0.3.2)
Building wheels for collected packages: opencv-python
  Building wheel for opencv-python (PEP 517) ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 /tmp/tmpxl4fq1u5_in_process.py build_wheel /tmp/tmpdgg843yi
       cwd: /tmp/pip-install-681jn0xe/opencv-python_e610009f30624d9ea2b1e3ef82a9824f
  Complete output (11 lines):
  patching file opencv/3rdparty/openexr/IlmImf/ImfSystemSpecific.cpp
  /tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/cmake/data/bin/cmake: error while loading shared libraries: libssl.so.3: cannot open shared object file: No such file or directory
  Traceback (most recent call last):
    File "/tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/skbuild/setuptools_wrap.py", line 639, in setup
      cmkr = cmaker.CMaker(cmake_executable)
    File "/tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/skbuild/cmaker.py", line 145, in __init__
      self.cmake_version = get_cmake_version(self.cmake_executable)
    File "/tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/skbuild/cmaker.py", line 102, in get_cmake_version
      raise SKBuildError(msg) from err
  
  Problem with the CMake installation, aborting build. CMake executable is /tmp/pip-build-env-im9uh8sr/overlay/lib/python3.9/site-packages/cmake/data/bin/cmake
  ----------------------------------------
  ERROR: Failed building wheel for opencv-python
Failed to build opencv-python
ERROR: Could not build wheels for opencv-python which use PEP 517 and cannot be installed directly

@stuartiannaylor now is fantastic mediapipe maybe best of opencv

@mchan hi man, is awesome mirror.
Can you explain how you did it with opencv?
i get to the point of installing that and then i stop and it messes up the system and i have to do it all over again every time. i use an rpi4 and now i have a v3 camera, before i had a v2 camera.
thank you for answer me

@MMRIZE I see. too bad because that would have been a good thing, but I guess the developers are busy to create a module for that.
But it would be damn cool to have it

Hello developers.
I am trying out the MMM-WIDGET2 module, but I cannot insert a finance calendar. this is the site.

• https://tradingeconomics.com ‘ calendar
  it turns out you need to use an API but i don’t know how to do it.
  can anyone do this? available for 32-64bit system with bulleye and bookworm OS (pi4 and pi5).
  i am also looking at these calendars:
• https://it.tradingview.com/economic-calendar
• https://investire.biz/calendario-economico