@pyrosmiley
Good ideas … i will save my config and then delete the whole stuff - make a clean install of the modules.
Maybe there is something, which blocks the corret working …
I’ll try that and then get back to you.
Thanks

@pyrosmiley
Thanks for your reply.
I’ll will test my mirror with an old backup. This was working well.
But since I did not get any content on my mirror either from the Wunderlist or Todoist … i was a bit desperate.
Can you give me a screenshot which token (Wunderlist/Todoist) i have to use for the config file … i’ve tested client ID, client secret , test token … nothing works.
I’ve rebooted my pi more than x times, tried a backup without luck … so i will have a look, if i have an very old backup somewhere on my server …
Greets

Hi …
for some weeks my wunderlist was usable on my magic mirror, but then (i don’t know when …) it shows just the header - nothing more. Can someone help me with 2/3 screenshots, which id/token/api i have to catch and where this is exactly to be placed in the config file?
If possible for both - Wunderlist and Todoist, 'cause i really don’t know which one is the better one for me and my family.
THANKS !!!

@schlachtkreuzer6
Yes, of course you should!

@reaper81
You should ask the service …
I think, that the will deliver the power adapter and you should give them the old one.

and did you get that:
–> recall off PDS241/271

… and a few more from my site :-)

• Can you show us, how do you dismantled the foot
  and how do you attach the power cable on the screen?
• What about the temperature of the monitor? Will not be too hot in the tight construction?
• Do you apply black foil on the back side of the mirror to improve the mirror effect?

Thanks for all your tips and pictures!

Very good - thanks for sharing!

One more :-)
Can you explain the first picture a bit more? What are the individual boxes and connections that can be seen in the picture?

Hi reaper81,
same question from my site:
how did you attach the mirror to the wooden frame to make it look frameless? Can you provide us some pictures and tipps?

@reaper81:
What kind of PIR do you use? Maybe a HC-SR501?
And what happens, if the screen comes back from standby? Did a message e. g. “HDMI” or similar appear on the screen?

@nh_790
I’m also looking for a new screen.
But i need a 32’', really flat and, because i’ll use a PIR to send the monitor to standby off/on, without any logo or information “Signal lost/ Signal found” or similar …

Any ideas?
Thanks

@steve23p9835908
Hi Steve,

did you find one?
I’ve got the same problem …

Thanks MyMirror

@Atteraxol
Did you find a monitor?
I have the same problem with my 32’’ screen.
HDMI logo and “no signal” … bad :-(

You can see it here :-(

–> https://1drv.ms/v/s!ApE0YZ4Ndle9jzjzH7u3vSCmXb7G

Merry xmas :-),

thanks … your script works - my monitor not really :-(
If your script power off HDMI i’ll get a “HDMI”-Logo and “no Signal” … bad :-(
It seems that i have to buy a different screen.
Which one do you use? Is it available as 32’’ ?

Greets
MyMirror

Hi @ryck,

i think it is python …
I just get “Python 2 (IDLE)” on my menue.
I’ll try to force an update with
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install --reinstall python3
but, after reboot, nothing happens. I’ve got just python2 on my menue.
…
(After searching in the main menue Editor …)
OK - found python3 but without IDLE) - but this should not be the problem, or?
But if it is “easy” to install the IDLE - can you give me a hint?

I use pin 14 - as in the pir.py written - nothing happens … :-(

I think, it is the missing line 7 in the pir.py.
You wrote:
You have to change line 7 to the location of the pir.py file like this:
ExecStart=/usr/bin/python /path/to/your/pir.py

But in my pir.py i didn’t find a line like this …
Can you help me?

Thanks
MyMirror

Hey ryck, thanks for the details.
Did your monitor shows information like “no HMDI found” or “lost signal” or anything like this, when the PIR turns off the screen?
If not … what have you done to suppress the text/infos?
Or is your monitor smart enough to do that for you?
Greets
MyMirror

Hi cowboysdude,

thanks for the hint. After trying (without success) it shows me the way to this autostart:

/home/pi/.config/lxsession/LXDE-pi/autostart
Where i have to do the same.
I got the infos from here: http://www.small-blog.de/raspberry-pi-bildschirmschoner-ausschalten/

Now it works.
Thanks

Hi all,

where can i adjust this Setting?
My monitor goes black after 10 minutes …

Thanks!