@zydecat74 any chance you could post us a picture to see how the film looks in reality? Considering going down the same path.

@slickric yes I did ask them that and they can cut it to specifications for you. I didn’t ask for a price of that though as I was put off by the $600.

looks like we are a few who are in the same position… Screen ready, RPI configured, bunnings is nearby… just nead the 2-way mirror.

Found this place earlier today as well - does anyone have any experience with their product?
http://www.tapplastics.com/product/plastics/cut_to_size_plastic/two_way_mirrored_acrylic/558
They DO shipment to Australia.
Sample being a 20" x 28" (equivalent to 50cm x 71cm) cost US$93 + US$ 82 for shipping. Hence TOTAL cost = US$175.

Curious if anyone has expereince with them?
You can also order a sample for US2.00 but the shipment of that is US$53, so not really worth it…

it’s quite big… Size (mm): 2440 x 1220 and Thickness (mm): 3mm. Hence way more than I need (planning a 50x75cm piece only)

I’ll let you know if I figure anything out from the other suppliers.

hi @jc21 ,did you get any further in finding a good supplier in Australia. Live in Sydney myself and just started looking into where to buy a 2-way mirror today. Called all plastic but they charge AU$600+GST for it as you need to buy the entire sheet. Way over what I had in mind.

Planning to reach out to the other ones later this week too, but curious if you have any advise?