@nobita with max. 300px it works, but before the update I had 550px and it works also but no more. Do someone know why?

@roramirez So I disabled all modules beside the analog clock and nothing changed, my analog face is still scrambled. I tested other faces and all are also scrambled.

@danielis woooow its working now since one hour!! thank you!!!

someone know why this happend to me after updating MM:

everything looks fine just the analag clock.

I tried to increase the updateInterval to 200000ms and disabled all other modules, but always after the second time the monitor turn off my raspberry freeze completely and I have to reboot. My CPU is around 9 -15% when they freeze. I try again with the old version oft he motion-detector and it works, not perfect but works.

I disabled mmm-systemperature and now I have no errors on my log but after first deactivation of the monitor my raspberry freeze completely. Before the pull everything works perfekt beside DHT, now nothing works ;o( strange…

@alexyak Now my MM start. But after awhile (2 min) i got this error and my MM freeze:

I disabled the DHT module but than i got this error:

Do you have also a solution for this? THX a lot!

and this is the error:

Hi Alex,
thank you so much for your work! Unfortunately my MM start with a black screen after the update. I tried to reboot my Raspi but it didn’t help. Should I make a npm install after the update?
THX

No one an idea?

With picamera. I installed MM on my other pi (completely new installation) and i got the same problem after i installed the motion detector. So I disabled on my MM the motion detector and it works fine on both pi’s. It’s very strange ;o(

Hi ,
so I just figure it out, that the motiondetector by alexyak blocking the DHT22 script. If I disable this module my DHT 22 works perfect. Somebody knows what make this problem?

I have test it with two dht22. One was mine and one I received from @Bangee who was so kind to test it before sending it and it was working at his home, but when I tried it at my home it wasn’t working. So I have no Idea what can be the failure.

Now my logs looks like this after I changed line 33:

THX @Bangee for your help. Now i got this error:

I just checkt it and I don’t have any errors …;o(

@Bangee ok, now I’m confused ;o)

The first 5 lines I tried during my MM was working but nothing happend, i had to wait 2 minutes and it shows just a new comment line. After i stopped my MM it was working like a charm (last two lines). What I’m doing wrong?..

Hi guys

I have some problems with this module. I test it with two DHT22 and I have always the same strange thing. Please look my short clip: [Youtube](video: https://youtu.be/gvuq6A13fw8). Sometimes it shows quickly the exact Temp and sometimes strange values but most of the time it shows undefined. I try to made a skipt outside of the MM and in this picture (link) you can see , at the same time my skript shows the right value but in MM its undefined.
Can someone test this module or help me to find the fault? THX a lot for any help!

@Sillec123 no, just with a normal circular table saw.

@PaulB Thank you!
I bought this one: Max Hauri Klappstecker Clip-Clap 3 ×.

@Sillec123 Hi…IKEA HOVET mirror

Greetings from Switzerland.