MMM-OpenWeatherMapForecast stuck on Loading....

[sdetweil]

@bassin12 said in MMM-OpenWeatherMapForecast stuck on Loading....:

401

well, that is

http error 401 unauthorized

so, that looks like there is some error in your apiKey

[sdetweil]

@bassin12 said in MMM-OpenWeatherMapForecast stuck on Loading....:

module: “MMM-OpenWeatherForecast”,

also, this is a different module than we are discussing

MMM-OpenWeatherMapForecast

[sdetweil]

@bassin12 your config works perfectly with my apikey

[sdetweil]

@bassin12 also, please enclose all config and code sections in a code block

copy paste the text into the new message
select the text
and the hit the button </> above the editor

[bassin12]

This is really funny, I downloaded the right module now, tested with my key, and now it is saying the key is invalid, this is the code I’m using

{
                       module: "weather",
                       position: "top_right",
                       header: "Weather Forecast",
                       config: {
                               weatherProvider: "openweathermap",
                               type: "forecast",
                               location: "Suwanee",
                               locationID: "4225309",
                               apiKey: "Mykey"
                       }
               },


               {
                 module: "MMM-OpenWeatherMapForecast",
                 header: "Weather",
                 position: "top_right",
                 classes: "default everyone",
                 disabled: false,
                 config: {
                   apiKey: "Mykey",
                   latitude: 51.506130,
                   longitude: -0.090270,
                   iconset: "4c",
                   concise: false,
                   forecastLayout: "table"
                 }
               },

This is the error I get

[29.08.2022 09:07.47.834] [LOG] [MMM-OpenWeatherMapForecast] 29-Aug-22 09:07 ** ERROR ** No API key configured. Get an API key at https://openweathermap.org/api/one-call-api

I tried the Latitude and Longitude with and without quotes.

[sdetweil]

@bassin12 this module uses all lowercase for the key name field

apikey:

this system is case sensitive

[bassin12]

I did the code change in node_helpe.js, and the system now reports this error

[29.08.2022 10:34.06.199] [LOG] [MMM-OpenWeatherMapForecast] 29-Aug-22 10:34 ** bad status ** 401

my full config.js is this:

/* MagicMirror² Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/configuration/introduction.html
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
	
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "Suwanee",
				locationID: "4225309",
				apiKey: "45fe452eea1fcfe3589cd5e8aa3f3f93" 
			}
		},


          {
                        module: "MMM-OpenWeatherMapForecast",
                        header: "Weather",
                        position: "top_left",
                        classes: "default everyone",
                        disabled: false,
                        config: {
                                apikey: "45fe452eea1fcfe3589cd5e8aa3f3f93",
                                latitude: "51.506130",
                                longitude: "-0.090270",
                                iconset: "4c",
                                concise: false,
                                forecastLayout: "table"
                        }
                },	  	
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[sdetweil]

@bassin12 yep… something…
both work for me…

[sdetweil]

@bassin12

hm… I created a new key…

seems OpenWeatherForecast has a bug

in its node_helper.js
’
change

          "&units=" + payload.units +

to (same as openWeatherMapForecast

                    (payload.units !== "" ? "&units=" + payload.units : "") +

can’t pass in junk

[sdetweil]

@bassin12 if the apikey is valid, I get 401 as well…

using my (new) apikey… all ok…