Read the statement by Michael Teeuw here.
Change page with MMM-Pages
-
@sdetweil said in Change page with MMM-Pages:
Effective recognition distance 5cm-15cm
(without obstruction of case or cover)If so, it is very little!
-
@Egnos
See how usage looks like.
https://youtu.be/BcpZvkcrfHU -
@MMRIZE said in Change page with MMM-Pages:
See how usage looks like.
https://youtu.be/BcpZvkcrfHUI just have to try!
@MMRIZE If instead you took the sensor without a cover how did you think of attaching it to the frame? Do you leave the sensor naked or cover it with a self made cover?
-
@Egnos
At this moment, I don’t have the real implementation to show,
But what I tried was;
Dig a hole then Implant the sensor in the frame. This gesture sensor has a short distance, but fortunately, through thin plastic/acryl/wood/paper/glass, it works. It detects changes in magnetic fields so except for metal/mirror(metal coated) it will work.
My first intention was to cover the hole with small cardboard paper, then paint it black (I prefer a black framed mirror), But I lost interest at the finish stage, so I left it naked. :D -
@MMRIZE said in Change page with MMM-Pages:
This gesture sensor has a short distance, but fortunately, through thin plastic/acryl/wood/paper/glass, it works. It detects changes in magnetic fields so except for metal/mirror(metal coated) it will work
Hi @MMRIZE unfortunately behind wood, plastic or plexiglass the sensor does not work … it’s a big problem!
Do you know by chance if this sensor has a SW adjustment (I don’t see any trimmer on the PCB …)?thanks
-
@Egnos
By my test, under 5mm thick plastic or wood panel it works. But there is no s/w fixture about it. -
@MMRIZE said in Change page with MMM-Pages:
By my test, under 5mm thick plastic or wood panel it works. But there is no s/w fixture about it.
I did several tests and even a piece of paper in front of it doesn’t work … it must be completely free …
I should try the glass …
