Magic Mirror logo appears at Boot and then the Raspberry desktop

[Syosse]

Hello
I ran following commands from a tutorial

1.) Install Magic Mirror:
bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)”

2.) Turn off screen saver and setup pm2 to autostart MM on boot.
bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/screensaveroff.sh)”

3.) Add using pm2 to autostart MagicMirror at bootup
bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)”

This is the Command Screen:

Anyone know why it shows only the Desktop and not the Magic Mirror ?

Thanks!!!

[sdetweil]

@Syosse you don’t need to run all the commands

the install asks if u want to turn off the screensaver. if you said yes, then it’s done

if u said no then you would run the screensaver off script it’s the exact same script code. it’s just there if you changed your mind.

now on to the pm2 thing
same same. but

in some systems the automation script has trouble

do this

pm2 startup

it will output a command to execute
copy/paste that command and hit enter

when it’s done do

| edited
pm2 start ~/MagicMirror/installers/pm2_MagicMirror_new.json
pm2 save

then reboot

[Syosse]

@sdetweil said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

@Syosse you don’t need to run all the commands

the install asks if u want to turn off the screensaver. if you said yes, then it’s done

if u said no then you would run the screensaver off script it’s the exact same script code. it’s just there if you changed your mind.

now on to the pm2 thing
same same. but

in some systems the automation script has trouble

do this

pm2 startup

it will output a command to execute
copy/paste that command and hit enter

when it’s done do

pm2 start ~/MagicMirror/installers/pm2_MagicMirror.json
pm2 save

then reboot

All right thanks for the Information with the Screensave, now its for me clear.
I have done u Command but it shows me : [PM2][ERROR] Script not found: /home/Admin/up

do u know why ?

Thanyk so much!

[sdetweil]

@Syosse if you used either of my scripts I download that file

do

ls ~/MagicMirror/installers -laF

[sdetweil]

@sdetweil is Admin the root user, or the userid u created at SD card startup time?

pm2 will run as user not root

[Syosse]

@sdetweil said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

@sdetweil is Admin the root user, or the userid u created at SD card startup time?

pm2 will run as user not root

Admin is the Credentials that i insert at the beginning of Install Raspberry Pi Imager:

ls ~/MagicMirror/installers -laF:

Thanks so much!

[sdetweil]

@Syosse can you do

cat  ~/MagicMirror/installers/pm2_MagicMirror.json

thx

[sdetweil]

@Syosse can u also paste the contents of

~/MagicMirror/installers/pm2_setup.log

[Syosse]

@sdetweil said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

@Syosse can u also paste the contents of

~/MagicMirror/installers/pm2_setup.log

yea of course:

Thanks so much!

[sdetweil]

@Syosse ok, try this then

cat  ~/MagicMirror/installers/pm2_MagicMirror_new.json