MagicMirror no longer launches

[sdetweil]

@RIKKO14 because MagicMirror now uses a pm2 library inside, we have a version conflict…(I think)

do

sudo npm install pm2 -g

then reboot

[RIKKO14]

@sdetweil So, I do :

sudo npm install pm2 -g

then I reboot my Pi but the problem stile the same, I Have this screen :

[sdetweil]

@RIKKO14 your second screen is only the top.
open a terminal window and
do

pm2 stop all
pm2 flush 
pm2 status

should show MagicMirror as the pgm to run

then do

pm2 start MagicMirror 

wait

does it appear on screen?

if not do

pm2 stop all
pm2 logs --lines=50 >somefile.txt 
 ctrl-c to stop log output

show content of somefile.txt here

BR CAREFUL some log info will expose your calendar url…
edit somefile.txt and xxx out the private part.of url

[RIKKO14]

@sdetweil

pi@raspberrypi:~ $ pm2 stop all
pm2 flush 
pm2 status

>>>> In-memory PM2 is out-of-date, do:
>>>> $ pm2 update
In memory PM2 version: 5.2.2
Local PM2 version: 5.3.1

[PM2] Applying action stopProcessId on app [all](ids: [ 0 ])
[PM2] [MagicMirror](0) ✓
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 567… │ stopped   │ 0%       │ 0b       │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
[PM2] Flushing /home/pi/.pm2/pm2.log

>>>> In-memory PM2 is out-of-date, do:
>>>> $ pm2 update
In memory PM2 version: 5.2.2
Local PM2 version: 5.3.1

[PM2] Flushing:
[PM2] /home/pi/.pm2/logs/MagicMirror-out.log
[PM2] /home/pi/.pm2/logs/MagicMirror-error.log
[PM2] Logs flushed

>>>> In-memory PM2 is out-of-date, do:
>>>> $ pm2 update
In memory PM2 version: 5.2.2
Local PM2 version: 5.3.1

┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 567… │ stopped   │ 0%       │ 0b       │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~ $ pm2 start MagicMirror 

>>>> In-memory PM2 is out-of-date, do:
>>>> $ pm2 update
In memory PM2 version: 5.2.2
Local PM2 version: 5.3.1

[PM2] Applying action restartProcessId on app [MagicMirror](ids: [ 0 ])
[PM2] [MagicMirror](0) ✓
[PM2] Process successfully started
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 567… │ online    │ 0%       │ 2.7mb    │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~ $ pm2 stop all
pm2 logs --lines=50 >somefile.txt 
 ctrl-c to stop log output

>>>> In-memory PM2 is out-of-date, do:
>>>> $ pm2 update
In memory PM2 version: 5.2.2
Local PM2 version: 5.3.1
[PM2] Applying action stopProcessId on app [all](ids: [ 0 ])
[PM2] [MagicMirror](0) ✓
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 567… │ stopped   │ 0%       │ 0b       │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘

[sdetweil]

@RIKKO14 ok, do the

pm2 update as it says

probably have to do
sudo pm2 update
as it is installed globally in protected folders

[RIKKO14]

@sdetweil

[sdetweil]

@RIKKO14 yes, it’s stupid. run the fixuppm2 script from my scripts page

[RIKKO14]

@sdetweil this script : ?

bash -c  "$(curl -sL  https://www.dropbox.com/s/cy2z7lbkpifcbrk/fixuppm2.sh?dl=0)"

[sdetweil]

@RIKKO14 no… from my git repo

https://github.com/sdetweil/MagicMirror_scripts

[RIKKO14]

@sdetweil so this one :

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)"