MMM-Netatmo does not load

[sil3ntstorm]

@CFenner

Thanks, it seems to be working now, but I can’t find this setting so that the rooms are displayed one below the other. These are displayed one below the other, even if I enter false for horizontal:

{

  module: 'netatmo',

  position: 'bottom_left', // the location where the module should be displayed

  header: 'Netatmo', // a header if you like one

  config: {

    clientId: 'secret123', // your app id

    clientSecret: 'secret123', // your app secret

    refresh_token: 'secret123', // your generated refresh token   

    refreshInterval: '3',  

    dataOrder: ["Noise","Pressure","CO2","Humidity","Temperature","Rain"],

    design: 'bubbles',

    horizontal: 'true',

    showBattery: 'true',

    showWiFi: 'true',   

    showTrend: 'true',

    showMeasurementIcon: 'true',

    showStationName: 'true',

    showModuleNameOnTop: 'false',

    fontClassModuleName: 'xsmall',

    fontClassPrimary: 'xsmall',

    fontClassSecondary: 'xsmall',

    fontClassMeasurement: 'xsmall',

    thresholdCO2Average: '1200',

    thresholdCO2Bad: '1800',

 
  }

},

[Laz]

@sil3ntstorm

[sil3ntstorm]

This post is deleted!

[Laz]

@CFenner Good afternoon! I am still waiting for the decision to recalculate in mm Hg.
And tell me how to fix the wrong display of the wind direction?

[Lusbueb]

@tommys in history the moduleOrder was like this:

moduleOrder: ["Outdoor", "Regen", "Wind", "Schlafzimmer", "Wohnzimmer"]

but in newer versions the code has a new variable called showStationName and as default it is set to true. Now set this to false or expand the moduleOrder like this StationName - Module

moduleOrder: ["im Fritz - Outdoor","im Fritz - Regen","im Fritz - Schlafzimmer","im Fritz - Wohnzimmer"]

this solved my Problem Netatmo load without errors but shows nothing (blank screen)

good luck, Peter

[sil3ntstorm]

Since yesterday it hasn’t been displayed on my mirror anymore, you can only see module name Netatmo loading…
I also did the module update, the problem still exists. Has anything been adjusted that I also have to change in the config so that it is displayed again?

[anton2023]

@sil3ntstorm
same issue here, it seems to loose the refresh token each day:
i have to re create a refresh token , and copy it to the config, js, the module works.
the following morning after the pi shutdown, the module isn,t working, need to re create a refresh token for it works…

[schrecki]

Hello together, same issue here. I’m using the RaymondMolenaar Fork, but the issue is the same.
The generated refresh-token only works once. I can see the data, but after a refresh only the loading circle.

[A Former User]

@anton2023 it’s not only after reboot, but after each reload of the mirror itself e.g. after changing and saving config.js.

Workaround, until this gets fixed, would be

1. don’t touch the configuration and
2. deactivate automatic shut down/restart every night

Best regards,

Nico

[CFenner]

Sounds like the refresh token lifetime got reduced.
Probably the module should only take credentials and get the token itself. Unfortunately, I currently don’t have the time to look into it.