Read the statement by Michael Teeuw here.
MMM-Netatmo does not load
-
-
This post is deleted! -
@CFenner Good afternoon! I am still waiting for the decision to recalculate in mm Hg.
And tell me how to fix the wrong display of the wind direction? -
@tommys in history the moduleOrder was like this:
moduleOrder: ["Outdoor", "Regen", "Wind", "Schlafzimmer", "Wohnzimmer"]but in newer versions the code has a new variable called showStationName and as default it is set to true. Now set this to false or expand the moduleOrder like this StationName - Module
moduleOrder: ["im Fritz - Outdoor","im Fritz - Regen","im Fritz - Schlafzimmer","im Fritz - Wohnzimmer"]this solved my Problem Netatmo load without errors but shows nothing (blank screen)
good luck, Peter
-
Since yesterday it hasn’t been displayed on my mirror anymore, you can only see module name Netatmo loading…
I also did the module update, the problem still exists. Has anything been adjusted that I also have to change in the config so that it is displayed again? -
@sil3ntstorm
same issue here, it seems to loose the refresh token each day:
i have to re create a refresh token , and copy it to the config, js, the module works.
the following morning after the pi shutdown, the module isn,t working, need to re create a refresh token for it works… -
Hello together, same issue here. I’m using the RaymondMolenaar Fork, but the issue is the same.
The generated refresh-token only works once. I can see the data, but after a refresh only the loading circle. -
@anton2023 it’s not only after reboot, but after each reload of the mirror itself e.g. after changing and saving config.js.
Workaround, until this gets fixed, would be
- don’t touch the configuration and
- deactivate automatic shut down/restart every night
Best regards,
Nico
-
Sounds like the refresh token lifetime got reduced.
Probably the module should only take credentials and get the token itself. Unfortunately, I currently don’t have the time to look into it. -
@CFenner, sure that it depends on lifetime? The issue occurs within seconds when i change my config and the mirror restarts it’s modules. In that case it would be a one-time-token, the name “refresh-token” would no longer do justice to the matter. :-D
That you don’t have time at the moment is no problem to me at all, as I’m not shuting down the Pi at night. Measured by max. 5 watt consumption and 24/7 use at an electricity price of about 30 cents, that’s ~€13 per year. I think this discussion has certainly been had elsewhere in this forum, so I won’t go into too much depth. This decision is up to each individual. Would just be great to have it fixed at some time, generating a new refresh-token at Netatmo developer portal every time I change the config is just a matter of 1 minute and 5 clicks, but a bit annoying over the time. ;-)
Anyway, thanks for your great work on this module!
